Sim2 Multimedia HT300 XTRA Switching on and OFF the Projector, Switch on from STAND-BY

Page 11

which is undesirable for a large audience.

Preferably, use a screen with black, non-reflecting borders, which will perfectly frame the projected image.

Avoid light shining directly on the screen during projection as this will reduce contrast and black level detail on the projected

XTRA

image. For the true cinema experience best results are achieved with little or no ambient light.

Furniture and other objects with reflecting surfaces, as well as light coloured walls should be avoided, as they are likely to interfere with the screen’s characteristics.

5 SWITCHING ON AND OFF THE PROJECTOR

CAUTION: Connect the projector to a power supply with a nominal voltage within the following values: 100-240 Vac, 50/60 Hz. It must be earthed (Fig. 13).

Position I : ON

Position O : OFF

Power switch

Fused power socket

Power plug

Fig. 13

SWITCH ON FROM STAND-BY

By remote control: press one of 1...9

By keyboard: press Up or Down Arrow .

2005

F1

E

Upon switch on (in position I) the projector will initialise (red and green LEDs on). Followed by stand-by mode (red LED on) (Fig. 14).

Fig. 15

When switching on from stand-by, the projector will turn on the lamp; after a brief warm up period the image will be displayed (green LED on).The input automatically selected will be the last one memorised prior to switch off (Fig. 15).

You may experience difficulties switching on the projector shortly after switching off: the lamp may fail to come on as it is too hot. Just wait a few minutes to cool it down.

DVI

C-SYNC

Fig. 14

9

Image 11 Sim2 Multimedia HT300 XTRA installation manual Switching on and OFF the Projector, Switch on from STAND-BY
Contents HT300 Xtra Back Light XTRA, a SIM2 Multimedia SpA product Fig IntroductionLamp operating hours may already be at between SIM2 carries out comprehensive functional testingOrder to guarantee the maximum product quality For this reason, when you start using the product12 11 13 Important Safety Instructions 100-240 Vac Packaging and Contents Installation Keystone Switch on from STAND-BY Switching on and OFF the ProjectorConnections Switching OFF and Returning to STAND-BYLED Indicators VGA Input Composite Video InputUxga can be displayed Video InputDVI Input Keyboard PAD RS232 Interface ConnectorBatteries Remote ControlMain Menu On Screen MenusSource Selection Brightness Sharpness ModeCinema Mode PictureImage Adjustments Input Signals and ADJUSTABLE/SETTING ItemsAspect Frequency / PhasePosition Magnification Advanced SettingsHorizontal / Vertical Keystone SetupOrientation Menu Factory DefaultsTest Patterns Projection LensOSD Background OSD TimeoutLanguage OSD PositionTroubleshooting Guide Cleaning and MaintenanceVideo Image showing colour misalignment on vertical details Image is disturbed, unstable or noisyIncomplete image along borders vertical and horizontal Graphic image with poor quality vertical detailTechnical Specifications Optional AccessoriesGeneral DimensionsMin. DP Max CC Max. DP Projection DistancesScreen Size Width Min projection distance Max projection distanceFt. 11’ 13’ 15’ 12’ 17’ 14’ 19’ Connections SIM2 Multimedia is certified