Sim2 Multimedia HT300 XTRA installation manual Remote Control, Batteries

Page 16

XTRA

8 REMOTE CONTROL

Insert the batteries, taking care to match the polarity, as indicated in the battery recess of the remote (Fig. 26).

-+

+

 

-

 

four 1.5V

 

 

 

-

 

+

 

AAA alkaline

+

 

 

 

 

-

 

 

 

batteries

 

 

 

 

 

 

 

Fig. 26

Change the batteries in the remote control if experiencing difficulty in sending commands to the projector.

If the remote control is not to be used for a long period of time remove the batteries. Replace all batteries at the same time; do not replace one new battery with a used battery. If the batteries have leaked, carefully wipe the case clean and replace with new batteries.

The remote control sends commands to the projector via infrared signals.

It is possible to control the projector by pointing the remote control at the screen; the sensor at the front of the projector will pick up the reflected infrared commands. (Fig. 27).

Fig. 27

Avoid placing obstructions between the remote control and the infrared sensor at the front of the projector; this will impair the remote control performance.

14

Image 16 Sim2 Multimedia HT300 XTRA installation manual Remote Control, Batteries
Contents HT300 Xtra Back Light Introduction XTRA, a SIM2 Multimedia SpA product FigSIM2 carries out comprehensive functional testing Order to guarantee the maximum product qualityFor this reason, when you start using the product Lamp operating hours may already be at between12 11 13 Important Safety Instructions 100-240 Vac Packaging and Contents Installation Keystone Switching on and OFF the Projector Switch on from STAND-BYLED Indicators Switching OFF and Returning to STAND-BYConnections Composite Video Input Uxga can be displayedVideo Input VGA InputDVI Input RS232 Interface Connector Keyboard PADRemote Control BatteriesSource Selection On Screen MenusMain Menu Sharpness Mode Cinema ModePicture BrightnessInput Signals and ADJUSTABLE/SETTING Items Image AdjustmentsPosition Frequency / PhaseAspect Advanced Settings MagnificationOrientation SetupHorizontal / Vertical Keystone Factory Defaults Test PatternsProjection Lens MenuOSD Timeout LanguageOSD Position OSD BackgroundCleaning and Maintenance Troubleshooting GuideImage is disturbed, unstable or noisy Incomplete image along borders vertical and horizontalGraphic image with poor quality vertical detail Video Image showing colour misalignment on vertical detailsOptional Accessories Technical SpecificationsDimensions GeneralProjection Distances ScreenSize Width Min projection distance Max projection distance Min. DP Max CC Max. DPFt. 11’ 13’ 15’ 12’ 17’ 14’ 19’ Connections SIM2 Multimedia is certified