Sim2 Multimedia HT300 XTRA SIM2 carries out comprehensive functional testing, Time of shipment

XTRA
	A sophisticated proprietary optical system, coupled with a hight
	performance zoom lens ensures hight contrast images, superior
	uniformity and edge-to-edge definition.
	A new 6-segment colour wheel dramatically reduces the so
	called “rainbow effect” and gives a better contrast, better
	colorimetry and a lower black level to the image.
	The new HD2+ DMD™ chip ensures, on top of the high definition
	resolution (1280 x 720 pixels), an increased contrast ratio of >
	2800:1 thus delivering on the screen an even more realistic
	image.
	The DVI-D input allows a complete digital connectivity to an
Fig. 1	increasing amount of video sources equipped with digital
	outputs, thus guaranteeing a perfect reproduction, without any
Using the very latest in DLP™ technology, this projector has	loss of information or interference in the signal.
been designed specifically for high quality “Home Cinema”	The renowned DCDi™ technology is adopted for deinterlacing:
applications.	conversion from interlaced to progressive produces a smooth
	and natural image, without flickering, loss of vertical resolution
Sophisticated digital processing and a wide choice of inputs	and jaggedness along diagonal lines.
enable the connection of a variety of sources such as DVD	The low-noise ventilation system – with variable speed fans –
players, analogue and digital VCRs, analogue and digital sa-
tellite receivers and personal computers etc.	ensures appropriate cooling and maximizes projector reliability.
The long throw zoom lens allows the position of the projector to	To fully appreciate your new projector we recommend the use
	of a good quality screen and surround-sound system. Contact
be located behind the viewer, thus reproducing a cinema-like
	your nearest authorized SIM2 Multimedia dealer for further
installation (Fig. 2).
	details.
	SIM2 carries out comprehensive functional testing
	in order to guarantee the maximum product quality.
	For this reason, when you start using the product
	lamp operating hours may already be at between
	30 and 60.
	In addition to the regular tests, the Quality Control
	department performs additional statistical tests at
	the time of shipment.
	In this case the packing may show signs of having
Fig. 2	been opened, and the accumulated lamp operating
	hours may be slightly higher than the hours associ-
	ated with the standard tests.
	DLP and DMD are registered trademarks of Texas Instruments.
	DCDi is a registered trademark of Faroudja, a division of Genesis
	Microchip, Inc.
2