Sim2 Multimedia HT300 XTRA installation manual Installation

Page 9

XTRA

4 INSTALLATION

Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling or wall installation.

focus you should be able to clearly see each single pixel when within close proximity to the screen (Fig. 7).

CAUTION: In the case of ceiling or wall mounting using a suspension bracket, follow the instructions carefully and comply with the safety standards you will find in the box together with the bracket. If you use a bracket different to the one supplied by SIM2 Multimedia, you must make sure that the projector is at least 65 mm (2-9/16 inch) from the ceiling and that the bracket is not obstructing the air vents on the lid and on the bottom of the projector.

ZOOM

FOCUS

FOCUS

FOCUS

ZOOM

ZOOM

ZOOM

ZOOM

FOCUS

ZOOM

F1

F2

FOCUS

Adjust the feet underneath to obtain a level position, lining up the base of the projected image to the base of the projection screen (Fig. 6).

Fig. 7

The manual lens shift adjustment allows the projected image to be moved vertically, up or down, in relation to the centre of the screen; the maximum adjustment being equal to half the height of the image in either direction (Fig. 8).

Fig. 6

Position the projector the desired distance from the screen: the size of the projected image is determined by the distance from the lens of the projector to the screen and the zoom setting. See “Appendix B”: Projection distances” for more information.

Use the motorised lens zoom to adjust the image size and the motorised lens focus to achieve maximum clarity. With optimum

Fig. 8

In the event you are unable to centre the image within the screen area, tilt the projector until the image is correctly positioned. Any keystone error can be removed by the Keystone adjustment in the Set up menu (Fig. 9).

7

Image 9 Sim2 Multimedia HT300 XTRA installation manual Installation
Contents HT300 Xtra Back Light XTRA, a SIM2 Multimedia SpA product Fig IntroductionOrder to guarantee the maximum product quality SIM2 carries out comprehensive functional testingFor this reason, when you start using the product Lamp operating hours may already be at between12 11 13 Important Safety Instructions 100-240 Vac Packaging and Contents Installation Keystone Switch on from STAND-BY Switching on and OFF the ProjectorSwitching OFF and Returning to STAND-BY LED IndicatorsConnections Uxga can be displayed Composite Video InputVideo Input VGA InputDVI Input Keyboard PAD RS232 Interface ConnectorBatteries Remote ControlOn Screen Menus Source SelectionMain Menu Cinema Mode Sharpness ModePicture BrightnessImage Adjustments Input Signals and ADJUSTABLE/SETTING ItemsFrequency / Phase PositionAspect Magnification Advanced SettingsSetup OrientationHorizontal / Vertical Keystone Test Patterns Factory DefaultsProjection Lens MenuLanguage OSD TimeoutOSD Position OSD BackgroundTroubleshooting Guide Cleaning and MaintenanceIncomplete image along borders vertical and horizontal Image is disturbed, unstable or noisyGraphic image with poor quality vertical detail Video Image showing colour misalignment on vertical detailsTechnical Specifications Optional AccessoriesGeneral DimensionsScreen Projection DistancesSize Width Min projection distance Max projection distance Min. DP Max CC Max. DPFt. 11’ 13’ 15’ 12’ 17’ 14’ 19’ Connections SIM2 Multimedia is certified