Phase
The phase adjustment determines the stability and sharpness of the vertical lines in the projected image.
ADVANCED SETTINGS
Advanced colour settings are accessible via this menu.
We recommend the use of these settings only to the experienced user, as their adjustment can seriously affect final image quality.
ADVANCED SETTINGS
COLOR TEMPERATURE
GAMMA CORRECTION
Y/C DELAY | 2 |
VIDEO
ADVANCED SETTINGS
COLOR TEMPERATURE
GAMMA CORRECTION
XTRA
There are three fixed colour temperature settings, which are: High (9000÷9500 degrees K), Medium (circa 6500 degrees K), Low (circa 5000 degrees K).
The User option will allow you to select the colour temperatu- re of your choice.
COLOR TEMP. /USER
RED | 0 |
GREEN | |
BLU | 28 |
Gamma correction
Selects the Gamma’s correction curve. It determines the projector’s response to the grey scale, emphasizing - more or less - the different grades of brightness (blacks, dark, medium, light greys, whites) in the projected image.
GAMMA CORRECTION
FILM
VIDEO
GRAPHICS
Colour temperature
Select the colour temperature of the projected image.
COLOR TEMPERATURE zione
HIGH
MEDIUM
LOW
USER
Y / C Delay
Use this adjustment in the event of horizontal colour misalignment within the projected image. It is recommended that a colour bar test pattern be used for this adjustment.
MAGNIFICATION
Use this adjustment to magnify the projected image (please note the higher the magnification the poorer the quality of the image).
Adjust the level of enlargement using the Left and Right Arrow (the magnifying lens icon 
will appear at the centre of the image).
19