Sim2 Multimedia HT300 XTRA installation manual Optional Accessories, Technical Specifications

Page 27

XTRA

12 OPTIONAL ACCESSORIES

You can purchase the following optional accessories at your Dealer:

-Remote Input Interface with 10 m Cable.

-Wall/Ceiling Bracket Kit.

Use only original, or SIM2 Multimedia approved, accessories.

CAUTION: for ceiling/wall installation, by means of suspension bracket, carefully follow the instructions and safety instructions recommended by the Manufacturer in the bracket’s literature.

A TECHNICAL SPECIFICATIONS

OPTICAL

ELECTRICAL

Projection system:

optical engine based on 1 DMD™

 

HD2+ chip, sealed housing, dusty proof

DMD™ panel:

resolution 1280x720 pixel

Brightness uniformity:

10% above or below the average

Contrast ratio:

> 2800:1 (full On / full Off)

Projection lens:

zoom, 12 elements AR multilayer

 

coating, motorized focus and zoom,

 

manual elevation

Aperture f#:

2.7 (zoom max) - 3.3 (zoom min)

Picture size:

50-250 inches (diagonal measure)

Aspect ratio:

4/3 and 16/9

Throw ratio:

1.8:1 - 2.5:1

(throw distance: picture width)

 

Focus range:

2.2 - 13.0 m (7’ 3” - 42’ 8”)

Throw Distance:

60”: 2.4m - 3.3m (7’ 11” - 10’ 10”)

 

80”: 3.2m - 4.4m (10’ 6” - 14’ 5”)

 

100”: 4.0m - 5.5m (13’ 2” - 18’ 1”)

Keystone adjustement:

up to 26° (optical: ± 8° digital: ±18°)

Lamp:

120 W UHP

Lamp life time:

8000 hours (average value measured

 

in the laboratory under optimal condi-

 

tions; it can be sensibly reduced by

 

the unit misusing)

Input Signals:

CVBS on RCA/Phono type connector

 

S-VHS on Mini-DIN connector

 

RGBHV on DB15HD connector

 

RGBS / YCrCb on RCA/Phono type

 

connector

 

DVI-D

Horizontal frequency:

from 15 to 80 kHz (up to to UXGA

 

format @ 60 Hz)

Vertical frequency:

48-100 Hz

Video standards :

automatically selected (PAL B,G,H, I,

 

M,N,60, SECAM, NTSC 3.58, 4.43)

High definition video:

ATSC HDTV (480p, 720p, 1080i)

Graphic standards :

VGA, SVGA, XGA, SXGA, UXGA

Deinterlacer:

Faroudja chip set, DCDi, 3:2 pull

 

down sequence convertion

Colour temperature:

adjustable from 5000 to 9300 degrees

 

K

Video processor:

DTI, CTI, comb filter, noise reduction.

 

Sharpness, Y/C delay and NTSC tint

 

adjustments

Remote control:

via infrared remote control and via

 

computer through RS232 serial

 

interface

Remote inputs:

via Remote Inputs Interface (optional)

 

and cable with EVC connector

 

25

Image 27 Sim2 Multimedia HT300 XTRA installation manual Optional Accessories, Technical Specifications
Contents HT300 Xtra Back Light XTRA, a SIM2 Multimedia SpA product Fig IntroductionLamp operating hours may already be at between SIM2 carries out comprehensive functional testingOrder to guarantee the maximum product quality For this reason, when you start using the product12 11 13 Important Safety Instructions 100-240 Vac Packaging and Contents Installation Keystone Switch on from STAND-BY Switching on and OFF the ProjectorSwitching OFF and Returning to STAND-BY LED IndicatorsConnections VGA Input Composite Video InputUxga can be displayed Video InputDVI Input Keyboard PAD RS232 Interface ConnectorBatteries Remote ControlOn Screen Menus Source SelectionMain Menu Brightness Sharpness ModeCinema Mode PictureImage Adjustments Input Signals and ADJUSTABLE/SETTING ItemsFrequency / Phase PositionAspect Magnification Advanced SettingsSetup OrientationHorizontal / Vertical Keystone Menu Factory DefaultsTest Patterns Projection LensOSD Background OSD TimeoutLanguage OSD PositionTroubleshooting Guide Cleaning and MaintenanceVideo Image showing colour misalignment on vertical details Image is disturbed, unstable or noisyIncomplete image along borders vertical and horizontal Graphic image with poor quality vertical detailTechnical Specifications Optional AccessoriesGeneral DimensionsMin. DP Max CC Max. DP Projection DistancesScreen Size Width Min projection distance Max projection distanceFt. 11’ 13’ 15’ 12’ 17’ 14’ 19’ Connections SIM2 Multimedia is certified