Sim2 Multimedia HT300 XTRA Language, OSD Position, OSD Background, OSD Timeout, Info, Quick Menus

Page 24

XTRA

LANGUAGE

Lists the languages options available for the On Screen Display menus.

LANGUAGE

ENGLISH

ITALIANO

FRANCAIS

DEUTSCH

ESPANOL

PORTOGUES

OSD POSITION

To position the On Screen Display within the picture area, use the arrow keys (Fig. 31a) or press the 1 to 9 keys on the remo- te control (Fig. 31b).

Fig. 31a

Fig. 31b

OSD BACKGROUND

Gives a choice of backgrounds for the On Screen Display.

OSD TIMEOUT

Use this adjustment to set the display time after which the On Screen Display will disappear. Left and Right Arrow keys set the timing (within a 5-60 second timeframe).

INFO

This function displays the current status of the projector, input type, input frequency, etc.

22

Info

Mode

4:3

Source

Video

Standard Video

NTSC 60Hz/4.43MHz

Horiz Frequency

15.7kHz

Video Type

Normal

Aspect

Panoramic

Color Temperature

Low

Lamp Hour Meter

362

Software Version

2.08 H P (038)

VIDEO

Info

Mode

4:3

Source

RGB Graphic

Horiz Frequency

56.5kHz

Vertical Frequency

70Hz

Resolution

1024x768 Mode:77

Aspect

Normal

Color Temperature

Low

Lamp Hour Meter

362

Software Version

2.08 H P (038)

RGB-DVI

QUICK MENUS

The Quick menus allows the adjustment of most of the picture quality controls without recalling the main On Screen menus. Brightness, Contrast, Color, Tint, Sharpness and Filter adjustments appear at the bottom of the screen, one after another, when Up and Down Arrow keys are pressed.

MESSAGES

The following messages could appear on your screen:

No Signal

The projector does not recognise any signal sent through the selected input.

-Check that the selected input is actually connected to a video or graphic signal.

-Verify compatibility of video/graphic signals with technical specifications of your projector.

Image 24
Contents HT300 Xtra Back Light Introduction XTRA, a SIM2 Multimedia SpA product FigSIM2 carries out comprehensive functional testing Order to guarantee the maximum product qualityFor this reason, when you start using the product Lamp operating hours may already be at between12 11 13 Important Safety Instructions 100-240 Vac Packaging and Contents Installation Keystone Switching on and OFF the Projector Switch on from STAND-BYSwitching OFF and Returning to STAND-BY LED IndicatorsConnections Composite Video Input Uxga can be displayedVideo Input VGA InputDVI Input RS232 Interface Connector Keyboard PADRemote Control BatteriesOn Screen Menus Source SelectionMain Menu Sharpness Mode Cinema ModePicture BrightnessInput Signals and ADJUSTABLE/SETTING Items Image AdjustmentsFrequency / Phase PositionAspect Advanced Settings MagnificationSetup OrientationHorizontal / Vertical Keystone Factory Defaults Test PatternsProjection Lens MenuOSD Timeout LanguageOSD Position OSD BackgroundCleaning and Maintenance Troubleshooting GuideImage is disturbed, unstable or noisy Incomplete image along borders vertical and horizontalGraphic image with poor quality vertical detail Video Image showing colour misalignment on vertical detailsOptional Accessories Technical SpecificationsDimensions GeneralProjection Distances ScreenSize Width Min projection distance Max projection distance Min. DP Max CC Max. DPFt. 11’ 13’ 15’ 12’ 17’ 14’ 19’ Connections SIM2 Multimedia is certified