Sim2 Multimedia HT300 XTRA installation manual On Screen Menus, Source Selection, Main Menu

Page 17

XTRA

9 ON SCREEN MENUS

SOURCE SELECTION

The Source Selection menu is recalled by pressing the key: 0/AV of the remote control or the Up/Down Arrow key of the keyboard pad. The selected source will be highlighted in yellow. Use Up and Down Arrow keys to browse sources. Right Arrow to select the desired source.

Alternatively, use the remote control to directly select the required source (1 to 8).

Source Selection

1Video

2S-Video

3RGBS 15 kHz

4YCrCb 15 kHz

5RGBS 32 kHz

6YCrCb 32 kHz

7Graphics RGB

8DVI-D

0

RI2 inputs

When using the optional Remote Input Interface press the 0/ AV key twice to display Remote Input Interface sources.

Source Selection / RI2

1Video 1

2Video 2

3S-Video 1

4S-Video 2

5RGBS 15 kHz

6YCrCb 15 kHz

7RGBS 32 kHz

8YCrCb 32 kHz

9Graphics RGB

0

Projector Inputs

When a new source is selected a box appears on the screen with the following indications: selected source, standard vi- deo (for video signals), resolution (for graphic signals) and aspect (Fig. 28).

Video

NTSC/60Hz

Normal

Fig. 28

MAIN MENU

To access the main On Screen Display menu, press the Menu key on the keyboard or the key Menu + or Menu - on the remote control (Fig. 29).

The main menu is divided into four sections to cover various adjustments in a practical and logical manner.

The on-screen menu layout is dependant upon the chosen input signal so various options may not be applicable, i.e. some typical adjustments to the video signal are not applicable to the graphic RGB signals from PC and viceversa.

ZOOM

F1

F2

FOCUS

Fig. 29

15

Image 17 Sim2 Multimedia HT300 XTRA installation manual On Screen Menus, Source Selection, Main Menu
Contents HT300 Xtra Back Light XTRA, a SIM2 Multimedia SpA product Fig IntroductionOrder to guarantee the maximum product quality SIM2 carries out comprehensive functional testingFor this reason, when you start using the product Lamp operating hours may already be at between12 11 13 Important Safety Instructions 100-240 Vac Packaging and Contents Installation Keystone Switch on from STAND-BY Switching on and OFF the ProjectorConnections Switching OFF and Returning to STAND-BYLED Indicators Uxga can be displayed Composite Video InputVideo Input VGA InputDVI Input Keyboard PAD RS232 Interface ConnectorBatteries Remote ControlMain Menu On Screen MenusSource Selection Cinema Mode Sharpness ModePicture BrightnessImage Adjustments Input Signals and ADJUSTABLE/SETTING ItemsAspect Frequency / PhasePosition Magnification Advanced SettingsHorizontal / Vertical Keystone SetupOrientation Test Patterns Factory DefaultsProjection Lens MenuLanguage OSD TimeoutOSD Position OSD BackgroundTroubleshooting Guide Cleaning and MaintenanceIncomplete image along borders vertical and horizontal Image is disturbed, unstable or noisyGraphic image with poor quality vertical detail Video Image showing colour misalignment on vertical detailsTechnical Specifications Optional AccessoriesGeneral DimensionsScreen Projection DistancesSize Width Min projection distance Max projection distance Min. DP Max CC Max. DPFt. 11’ 13’ 15’ 12’ 17’ 14’ 19’ Connections SIM2 Multimedia is certified