Andis Company P333T-PWR quick start Default Switch Settings Function Default Setting

Page 27

Configuring the Switch

For further information, please refer to Chapter 6 of the Avaya P333T-PWR User’s Guide.

The default settings for the Avaya P333T-PWR switch and its ports are determined by the Avaya P333T-PWR firmware. These default settings are subject to change in newer versions of the Avaya P333T-PWR firmware. See the P330 Release Notes for the most up-to-date settings.

Table 6: Default Switch Settings

Function	Default Setting

IP address	149.49.32.134

BootP mode	Never

Subnet Mask	255.255.255.0

Default gateway	0.0.0.0

Management PC SLIP IP Address	192.168.10.2

Management VLAN ID	1

Spanning tree	Enabled

TFTP Mode	Limited

TFTP Server	0.0.0.0

TFTP File Name	viisa

SNMPv1 communities:
Read-only	Public
Read-write	Public
Trap SNMP	Public

SNMP authentication trap	Disabled

CLI timeout	15 Minutes

User Name/Password	root/root

Issue 1 September 2005 25

Image 27

Contents Avaya P333T-PWR Stackable Switch Quick Start for Hardware InstallationPage Contents Page Page Nm 860 nm DBm Nm 1360 nm Nm 1570 nm Preparing Contacts you might need Defining the InstallationBefore you Start Gathering InformationPreparing Installation Files Choosing the Installation SitePreparing Needed Tools Environmental Requirements Condition Acceptable values Power RequirementsTip Building a stackC363T-PWR C364T-PWR Stack without C360 Stack with C360 SwitchStack Master election rules C364T-PWR Page Equipment Unpack the DeviceDocumentation Avaya P330 Documentation and Utilities CD Page Closed hinged end Mount the DeviceOpen hinged end AC input Power UpP333R DC version rear panel DC input optionalEstablishing a Console Connection Prepare for ConfigurationAssigning a Stack IP Address Establishing a Telnet Connection Configuring the SwitchBasic configuration Avaya P333R Default SettingsAssigning the Stack IP Address Default Switch Settings Function Default Setting Default Port Settings Parameter Default Setting Device Manager OverviewSystem Requirements Running the Device Manager Configuring the Device ManagerDevice Manager Commands Order to Use the following commandWelcome Installing from the P330 Documentation and Utilities CD Installing the Java Plug-inInstall from your Local Web Site Install from the Avaya Web SiteDocumentation