Andis Company P333T-PWR quick start Default Port Settings Parameter Default Setting

Prepare for Configuration

Table 7: Default Port Settings

Parameter	Default Setting
Port speed and duplex mode	●	10/100-TX ports: Auto-negotiation
	● 100Base-FXports:100 Mbps full duplex
	● 1000Base-X ports: 1000 Mbps full duplex
Flow Control	● 10/100 and 100 Mbps: Disabled
	●	1000 Mbps: Disabled (no pause)
Backpressure	● 10/100: Enabled (when in half duplex mode)
	●	100Base-FX &1000 Mbps: Not applicable
Auto-negotiation	●	10/100-TX ports: Enabled
	●	100Base-FX ports: Not applicable
	●	1000Base-X ports: Enabled
Administration State	Enabled
Port VLAN ID	1
Tagging mode	Clear
Port priority	Regular
Inline power	Enabled
Inline power priority	Low

Tip:

Functions operate in their default settings unless configured otherwise.

26 Quick Start for Hardware Installation: P333T-PWR Stackable Switch