![](/images/new-backgrounds/1267272/26727261x1.webp)
Running the Device Manager
To run the Device Manager:
1.Open your browser.
2.Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where aaa.bbb.ccc.ddd is the inband or outband interface IP address of the switch.
-The user name is “root”.
-The default password for
-The default passwords for
Note:
The P330 Device Manager passwords are the same as those of the CLI. If you change the passwords of the CLI then those passwords become active for the Device Manager as well. For further information on the passwords, refer to the Avaya P330 Installation and Configuration User Guide.
The welcome page is displayed.
Figure 7: The Welcome Page
If you have the Java
Issue 1 September 2005 29