• Universal asynchronous receiver/transmitter (UART)
ADM3202 RS-232 line driver/receiver
DB9 female connector
• LEDs
10 LEDs: 1 power (green), 1 board reset (red), 1 USB (red),
5general-purpose (amber), and 1 USB monitor (amber)
•Push buttons
5push buttons: 1 reset, 4 programmable flags with debounce logic
•Expansion interface
All processor signals
• Other features
JTAG ICE 14-pin header
The EZ-KIT Lite board has flash memory with a total of 4 MB. Flash memory can be used to store user-specific boot code, allowing the board to run as a stand-alone unit. For more information, see “Flash Memory” on page 1-10. The board also has 64 MB of SDRAM, which can be used by the user at runtime.
SPORT0 interfaces with the audio circuit, facilitating development of audio signal processing applications. SPORT0, SPORT1, and SPORT2 also interface to an off-board connector for communication with other serial devices. For more information, see “SPORT0 Interface” on page 2-4.
The UART of the processor connects to an RS-232 line driver and a DB9 female connector, providing an interface to a PC or other serial device.
xii | ADSP-BF538F EZ-KIT Lite Evaluation System Manual |