AMX Anterus manual Adding a Tag to the System, Removing a Tag from the System

Anterus Configuration Manager

Adding a Tag to the System

1.Click the Add Tag button in the bottom-left corner of the Global Register page (FIG. 21) to add a new RFID Tag to the system.

Click to add a new Tag

FIG. 21 Add Tag button

This invokes a set of fields for the new Tag at the bottom of the page (FIG. 22):

Tag ID

FIG. 22 New tag fields

Name

Info

Acquired Threshold

2.Enter a Tag ID.

3.Enter a Tag Name.

4.Enter Tag Info.

5.Enter the desired Acquired Threshold value for the new tag.

6.Click on the Accept button to enter the newly defined tag into the Anterus system.

Removing a Tag from the System

In either the Global Register Page or the Reader Configuration Page (see below), click on the Delete icon for any Tag (see FIG. 23 on page 22). Once deleted, the Tag is permanently removed from the system.

Anterus RFID Solution 21