Anterus™ RFID Solution
AXLink supports multiple topologies including Star,
ANT-RDR Product Specifications
The following table provides product specifications for the
ANT-RDR Specifications
Front Panel Components: | • RF Status LED (red): Indicates reception from RFID tag. |
| • AXLINK Status LED (green): Blinks to indicate the device is installed and |
| communicating properly. |
| Solid ON = Power on, but no master connection. |
| Solid OFF = No power |
| • RF Stub Antenna (433.92 MHz) |
|
|
Rear Panel Components: | • AxLink connector - |
| and power to the |
| • DEVICE ID |
| number. The device number is set by the total value of DIP switch positions |
| that are ON (down). |
|
|
RF Specifications: | • Transmission Frequency: 433.92 MHz |
| • Transmission Range: Up to 100 feet/30 meters (adjustable) |
| Note: Tag and Reader communication distances assume optimal orientation |
| between Tag and Reader. Read distances may also vary as a result of the pres- |
| ence of metal and environmental conditions. |
|
|
System Limitations: | • Up to 30 |
| • Up to 250 tags |
|
|
Power Requirements: | • 780 mW; ±12 VDC, 90 mA (max.) |
| • Power provided by |
|
|
Environmental: | • Operational temperature: 32º F to 140º F (0º C to 60º C) |
| • Storage temperature: |
| • Humidity: 5% to 90% (non condensing) |
|
|
Enclosure: | Black Metal Powder coat |
|
|
Dimensions (HWD): | • .906 x 2.500 x 3.424 (23.01 mm x 63.50 mm x 86.96 mm) |
| • Does not include antenna. |
|
|
Weight: | 4 oz. (113.4 grams) |
|
|
Certification: | The following standards applied in accordance with Article 5 of the directive, |
| 1999/5/EC: |
| • EN 300 |
| • ETS 300 683 |
|
|
Other AMX Equipment: | • |
|
|
Anterus products are designed to not interfere with WiFI and Zigbee frequency spectrum used by other AMX products.
ANT-RDR Mounting/Installation
The
Anterus RFID Solution | 3 |
|
|