AMX NXR-ZGW/-ZRP manual Front and Rear Components of the NXR-ZRP

Page 10

Overview

NXR-ZRP (FG5791-02) Specifications (Cont.)

Other AMX Products:	• Mio Modero R-3 Remote (FG148-03)
	• Mio Modern R-4 Remote (FG148-04)
	• NXR-ZGW NetLinx ZigBee Gateway (FG5791-01)
	• NXA-WAP 2403A	3 dBI Antenna (FG2255-20)
	• NXA-WAP 2405A	5.5 dBI Antenna (FG2255-21)
	• NXA-WAP 2413A	Mounting Bracket (FG2255-24)

Connection LEDs

		Reset Button
PWR/STATUS
ICSP
RF
ANT	RESET
(Front)		Antenna Mount
	12VDC	2-pin 3.5mm Phoenix
	12VDC	power connector
		power connector
	PWR
(Rear)
FIG. 2 Front and Rear Components of the NXR-ZRP

Connection to the Repeater device from either the NXR-ZGW or the Mio Modero® R- 3 or R-4 requires download and installation to the repeater of ZigBee Module firmware version 1.01.12, available from www.amx.com.

4	NXR-ZGW/-ZRP

Image 10

Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration NXR-ZGW FG5791-01 Specifications NXR-ZGW SpecificationsOverview NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP Specifications NXR-ZRP FG5791-02 SpecificationsFront and Rear Components of the NXR-ZRP How ZigBee works Network structureMultiple PAN ID installations Single PAN ID installationsMesh Network Arrangements FCC Compliance Multiple PAN ID NetworkNXR-ZGW/-ZRP Things to Consider Before Starting InstallationLocation and Antenna Direction Connecting the Optional Accessory Antennas Connecting the NXR-ZGW to a LANConnecting Power to the NXR-ZGW and NXR-ZRP Determining the Power SourceUsing the PSN NetLinx connector for power Table top installation of the NXR-ZGW and NXR-ZRPRack mounting the NXR-ZGW and NXR-ZRP NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP Summary of Gateway Settings NXR-ZGW Browser-based Configuration Manager PagesSummary Rebooting the Configuration Manager Determining the IP settings of the NXR-ZGWDetermining the PAN settings of the NXR-ZGW Checking the firmware versionSetting the IP Address ConfigurationNetwork IP Settings IP AddressSetting a new username and password Setting the DNS AddressUser Settings User SettingsPersonal Area Network PAN Enabling and disabling the wireless networkConnecting an NXR-ZRP to the network for the first time NetworkSetting the PAN channel Connecting a Repeater to the GatewayFinding the device’s description ConnectionsFinding a device’s EUI address Determining the device typeDetermining the device link quality Checking the device link statusPAN Device Details PAN Device DetailsLocating the device Putting a device on the Access ListRemoving a device from the Access List Changing a Connected Device descriptionChanging a device’s ZigBee networking information Utilities Allowing firmware updates to individual devicesAllowing firmware updates to all devices on a network Device FirmwareFinding the device’s Icsp number Connection LogDetermining the connection status of a device Connection LogTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Sending Firmware to The NXR-ZGW Device ConfigurationBefore beginning the Upgrade process Upgrading The NXR-ZGW via An IP AddressAssigning Communication Settings and TCP/IP Settings Verifying and Upgrading the device firmware via an IPSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control