AMX NXR-ZGW/-ZRP manual Device Configuration, Sending Firmware to The NXR-ZGW

Page 37

Device Configuration

Device Configuration

Sending Firmware to The NXR-ZGW

Before beginning the Upgrade process

Set up and configure your NetLinx Master. Refer to your particular NetLinx Master instruction manual for detailed setup procedures.

Prepare the communication on the NXR-ZGW for use. Refer to the Setting up a

Network section on page 13.

Refer to the NetLinx Studio version 2.4 or higher Help file for information on uploading firmware files via Ethernet.

If power or connection fails during a firmware upgrade, the file system may become corrupted.

A NXR-ZGW which is not using a valid username and password will not communicate with a secured Master. If you are updating the firmware on a keypad which is not using a username or password field, you must first remove the Master Security feature to establish an unsecured connection.

Upgrading The NXR-ZGW via An IP Address

Before beginning this section, verify that your device is powered and connected to the NetLinx Master through an Ethernet connection.

Preparing the Master for communication via an IP

1.Obtain the IP Address of the NetLinx Master from your System Administrator. If you do not have an IP Address for the Master, refer to your particular Master’s instruction manual for more information on obtaining an IP Address using NetLinx Studio 2.4 or higher.

From the Online Tree tab of the Workspace window, select the NetLinx Master.

Follow steps outlined in either the Obtaining or Assigning the Master’s IP Address sections from your particular NetLinx Master instruction manual to use an address.

Note the IP Address and Gateway information.

2.Launch NetLinx Studio 2.4 (default location is Start > Programs > AMX Control Disc > NetLinx Studio > NetLinx Studio 2.4).

NXR-ZGW/-ZRP

31

 

 

Image 37
Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration NXR-ZGW FG5791-01 Specifications NXR-ZGW SpecificationsOverview NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP FG5791-02 Specifications NXR-ZRP SpecificationsFront and Rear Components of the NXR-ZRP Network structure How ZigBee worksMultiple PAN ID installations Single PAN ID installationsMesh Network Arrangements Multiple PAN ID Network FCC ComplianceNXR-ZGW/-ZRP Things to Consider Before Starting InstallationLocation and Antenna Direction Connecting Power to the NXR-ZGW and NXR-ZRP Connecting the NXR-ZGW to a LANConnecting the Optional Accessory Antennas Determining the Power SourceUsing the PSN NetLinx connector for power Table top installation of the NXR-ZGW and NXR-ZRPRack mounting the NXR-ZGW and NXR-ZRP NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP Summary of Gateway Settings NXR-ZGW Browser-based Configuration Manager PagesSummary Determining the PAN settings of the NXR-ZGW Determining the IP settings of the NXR-ZGWRebooting the Configuration Manager Checking the firmware versionNetwork IP Settings ConfigurationSetting the IP Address IP AddressUser Settings Setting the DNS AddressSetting a new username and password User SettingsConnecting an NXR-ZRP to the network for the first time Enabling and disabling the wireless networkPersonal Area Network PAN NetworkConnecting a Repeater to the Gateway Setting the PAN channelFinding a device’s EUI address ConnectionsFinding the device’s description Determining the device typeChecking the device link status Determining the device link qualityPAN Device Details PAN Device DetailsRemoving a device from the Access List Putting a device on the Access ListLocating the device Changing a Connected Device descriptionChanging a device’s ZigBee networking information Allowing firmware updates to all devices on a network Allowing firmware updates to individual devicesUtilities Device FirmwareDetermining the connection status of a device Connection LogFinding the device’s Icsp number Connection LogTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Before beginning the Upgrade process Device ConfigurationSending Firmware to The NXR-ZGW Upgrading The NXR-ZGW via An IP AddressVerifying and Upgrading the device firmware via an IP Assigning Communication Settings and TCP/IP SettingsSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control