AMX NXR-ZGW/-ZRP manual AMX Limited Warranty and Disclaimer

Page 2

AMX Limited Warranty and Disclaimer

AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions:

Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year.

Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one

(1) year.

AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. The dimming performance or quality cannot be guaranteed due to the random combinations of dimmers, lamps and ballasts or transformers.

Unless otherwise specified, OEM and custom products are warranted for a period of one (1) year.

AMX Software is warranted for a period of ninety (90) days.

Batteries and incandescent lamps are not covered under the warranty.

This warranty extends only to products purchased directly from AMX or an Authorized AMX Dealer.

All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After the 30-day period the RMA will be cancelled. Any shipments received not consistent with the RMA, or after the RMA is cancelled, will be refused. AMX is not responsible for products returned without a valid RMA number.

AMX is not liable for any damages caused by its products or for the failure of its products to perform. This includes any lost profits, lost savings, incidental damages, or consequential damages. AMX is not liable for any claim made by a third party or by an AMX Dealer for a third party.

This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limitation of liability cannot be waived or amended by any person. This limitation of liability will be effective even if AMX or an authorized representative of AMX has been advised of the possibility of any such damages. This limitation of liability, however, will not apply to claims for personal injury.

Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or exclusion of incidental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not apply. This Limited Warranty gives the owner specific legal rights. The owner may also have other rights that vary from state to state. The owner is advised to consult applicable state laws for full determination of rights.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY.

Image 2
Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration Overview NXR-ZGW SpecificationsNXR-ZGW FG5791-01 Specifications NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP Specifications NXR-ZRP FG5791-02 SpecificationsFront and Rear Components of the NXR-ZRP How ZigBee works Network structureMesh Network Arrangements Single PAN ID installationsMultiple PAN ID installations FCC Compliance Multiple PAN ID NetworkNXR-ZGW/-ZRP Location and Antenna Direction InstallationThings to Consider Before Starting Connecting the Optional Accessory Antennas Connecting the NXR-ZGW to a LANConnecting Power to the NXR-ZGW and NXR-ZRP Determining the Power SourceRack mounting the NXR-ZGW and NXR-ZRP Table top installation of the NXR-ZGW and NXR-ZRPUsing the PSN NetLinx connector for power NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP Summary NXR-ZGW Browser-based Configuration Manager PagesSummary of Gateway Settings Rebooting the Configuration Manager Determining the IP settings of the NXR-ZGWDetermining the PAN settings of the NXR-ZGW Checking the firmware versionSetting the IP Address ConfigurationNetwork IP Settings IP AddressSetting a new username and password Setting the DNS AddressUser Settings User SettingsPersonal Area Network PAN Enabling and disabling the wireless networkConnecting an NXR-ZRP to the network for the first time NetworkSetting the PAN channel Connecting a Repeater to the GatewayFinding the device’s description ConnectionsFinding a device’s EUI address Determining the device typeDetermining the device link quality Checking the device link statusPAN Device Details PAN Device DetailsLocating the device Putting a device on the Access ListRemoving a device from the Access List Changing a Connected Device descriptionChanging a device’s ZigBee networking information Utilities Allowing firmware updates to individual devicesAllowing firmware updates to all devices on a network Device FirmwareFinding the device’s Icsp number Connection LogDetermining the connection status of a device Connection LogTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Sending Firmware to The NXR-ZGW Device ConfigurationBefore beginning the Upgrade process Upgrading The NXR-ZGW via An IP AddressAssigning Communication Settings and TCP/IP Settings Verifying and Upgrading the device firmware via an IPSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control