AMX NXR-ZGW/-ZRP manual PAN Device Details

Page 29

NXR-ZGW Browser-based Configuration Manager Pages

PAN Device Details

From the Connections page, clicking on a device’s EUI-64 number opens the PAN Device Details page.

FIG. 12 PAN Device Details Page

Each device provides the following:

PAN Device Details Page

Device Options	• On Access List: Controls whether the device is on the access list for the
	Connections page.
	• Locate: Finds the location of the device if active.

Connected Device	• Device Type: The type of network device.
	• Device Description: Description of the device as entered on PAN.
	• Status: Whether the networked device is active or asleep.

Device Networking	• EUI-64:The 64-bit ZigBee EUI address of the device.
	• Node ID: The 16-bit ZigBee short address of the device.
	• Link Quality: The quality of the connection to the network.
	• Traffic: The traffic byte count of the device.
	• Latency: A measure of the amount of time (in milliseconds) for a message round-trip
	from the device to the gateway and back.

Device Information	• Power Sources: All of the possible sources for power for the device, including
	mains electric power and battery backup
	• Current Power: Current power source being used by the device.
	• Power Level: Amount of required power being received by the device.
	• Host F/W Version: Latest firmware version installed in the device.
	• Node Type: The type of node used by the device.

NXR-ZGW/-ZRP	23

Image 29

Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration Overview NXR-ZGW SpecificationsNXR-ZGW FG5791-01 Specifications NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP FG5791-02 Specifications NXR-ZRP SpecificationsFront and Rear Components of the NXR-ZRP Network structure How ZigBee worksMesh Network Arrangements Single PAN ID installationsMultiple PAN ID installations Multiple PAN ID Network FCC ComplianceNXR-ZGW/-ZRP Location and Antenna Direction InstallationThings to Consider Before Starting Connecting Power to the NXR-ZGW and NXR-ZRP Connecting the NXR-ZGW to a LANConnecting the Optional Accessory Antennas Determining the Power SourceRack mounting the NXR-ZGW and NXR-ZRP Table top installation of the NXR-ZGW and NXR-ZRPUsing the PSN NetLinx connector for power NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP Summary NXR-ZGW Browser-based Configuration Manager PagesSummary of Gateway Settings Determining the PAN settings of the NXR-ZGW Determining the IP settings of the NXR-ZGWRebooting the Configuration Manager Checking the firmware versionNetwork IP Settings ConfigurationSetting the IP Address IP AddressUser Settings Setting the DNS AddressSetting a new username and password User SettingsConnecting an NXR-ZRP to the network for the first time Enabling and disabling the wireless networkPersonal Area Network PAN NetworkConnecting a Repeater to the Gateway Setting the PAN channelFinding a device’s EUI address ConnectionsFinding the device’s description Determining the device typeChecking the device link status Determining the device link qualityPAN Device Details PAN Device DetailsRemoving a device from the Access List Putting a device on the Access ListLocating the device Changing a Connected Device descriptionChanging a device’s ZigBee networking information Allowing firmware updates to all devices on a network Allowing firmware updates to individual devicesUtilities Device FirmwareDetermining the connection status of a device Connection LogFinding the device’s Icsp number Connection LogTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Before beginning the Upgrade process Device ConfigurationSending Firmware to The NXR-ZGW Upgrading The NXR-ZGW via An IP AddressVerifying and Upgrading the device firmware via an IP Assigning Communication Settings and TCP/IP SettingsSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control