AMX NXR-ZGW/-ZRP manual Select the device’s firmware file from the Files section FIG

Page 39

Device Configuration

3.After the Communication Verification dialog window verifies active communication between the PC and the Master, verify the NXR-ZGW appears in the OnLine Tree tab of the Workspace window. The default device value is 10001.

4.If the device firmware version is not the latest available; locate and download the latest firmware file from the www.amx.com > Tech Center > Downloadable Files > Firmware Files section of the website.

5.Select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open the Send to NetLinx Device dialog (FIG. 17). Verify the device’s System and Device number values match those values listed within the System folder in the OnLine Tree tab of the Workspace window.

Selected Firmware file		Description field for selected KIT file

Firmware download status

Device value and System number must match the values

listed in the Workspace window

FIG. 17 Send to NetLinx Device dialog

6.Select the device’s firmware file from the Files section (FIG. 17).

7.Enter the Device value associated with the device and the System number associated with the Master (listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.

8.Click the Reboot Device checkbox. This causes the NXR-ZGW device to reboot after the firmware update process is complete.

9.Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog (FIG. 17). Do not pull power from device during transfer, it can take approximately 5 minutes to finalize firmware transfer. The upgrade can still be in progress when the bargraph reaches the end, it is a good idea to wait until the process is complete.

10.Click Close (after the device reboots) to return to the main program.

11.Right-click the associated System number and select Refresh System. This causes a refresh of all project systems, establishes a new connection to the Master, and populates the System list with devices on your particular system.

NXR-ZGW/-ZRP	33

Image 39

Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration NXR-ZGW Specifications NXR-ZGW FG5791-01 SpecificationsOverview NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP FG5791-02 Specifications NXR-ZRP SpecificationsFront and Rear Components of the NXR-ZRP Network structure How ZigBee worksSingle PAN ID installations Multiple PAN ID installationsMesh Network Arrangements Multiple PAN ID Network FCC ComplianceNXR-ZGW/-ZRP Installation Things to Consider Before StartingLocation and Antenna Direction Determining the Power Source Connecting the NXR-ZGW to a LANConnecting Power to the NXR-ZGW and NXR-ZRP Connecting the Optional Accessory AntennasTable top installation of the NXR-ZGW and NXR-ZRP Using the PSN NetLinx connector for powerRack mounting the NXR-ZGW and NXR-ZRP NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP NXR-ZGW Browser-based Configuration Manager Pages Summary of Gateway SettingsSummary Checking the firmware version Determining the IP settings of the NXR-ZGWDetermining the PAN settings of the NXR-ZGW Rebooting the Configuration ManagerIP Address ConfigurationNetwork IP Settings Setting the IP AddressUser Settings Setting the DNS AddressUser Settings Setting a new username and passwordNetwork Enabling and disabling the wireless networkConnecting an NXR-ZRP to the network for the first time Personal Area Network PANConnecting a Repeater to the Gateway Setting the PAN channelDetermining the device type ConnectionsFinding a device’s EUI address Finding the device’s descriptionChecking the device link status Determining the device link qualityPAN Device Details PAN Device DetailsChanging a Connected Device description Putting a device on the Access ListRemoving a device from the Access List Locating the deviceChanging a device’s ZigBee networking information Device Firmware Allowing firmware updates to individual devicesAllowing firmware updates to all devices on a network UtilitiesConnection Log Connection LogDetermining the connection status of a device Finding the device’s Icsp numberTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Upgrading The NXR-ZGW via An IP Address Device ConfigurationBefore beginning the Upgrade process Sending Firmware to The NXR-ZGWVerifying and Upgrading the device firmware via an IP Assigning Communication Settings and TCP/IP SettingsSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control