AMX NXR-ZGW/-ZRP manual FCC Compliance, Multiple PAN ID Network

Page 13

Overview

1 hop

NXR-ZGW (Coordinator)

NetLinx Master

CAT5 Ethernet

connection

Mio R-4

Mio R-4

PAN ID 1

1 hop

2 hops

3 hops

NXR-ZGW (Coordinator)

NetLinx Master

Mio R-4

CAT5 Ethernet connection

 

 

NXR-ZRP

 

NXR-ZRP

 

 

(Router)

 

(Router)

Mio R-4

Mio R-4

Mio R-4

Mio R-4

Mio R-4

 

 

PAN ID 2

 

 

FIG. 4 Multiple PAN ID Network

FCC Compliance

This device complies with Part 15 of the FCC rules. Subject to the following two conditions:

1.This device must not cause harmful interference and

2.This device must accept all interference, including interference that interferes with the operation of this device.

Modifications not expressly approved by the manufacturer will void the user’s authority to operate the equipment."

This device has been evaluated and found to be compliant with the FCC Rules for RF Exposure when the device is operated at a minimum separation distance of 2 cm. from the user and nearby persons. Operation of this device at closer distances should be avoided.

NXR-ZGW/-ZRP

7

 

 

Image 13
Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration NXR-ZGW FG5791-01 Specifications NXR-ZGW SpecificationsOverview NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP FG5791-02 Specifications NXR-ZRP SpecificationsFront and Rear Components of the NXR-ZRP Network structure How ZigBee worksMultiple PAN ID installations Single PAN ID installationsMesh Network Arrangements Multiple PAN ID Network FCC ComplianceNXR-ZGW/-ZRP Things to Consider Before Starting InstallationLocation and Antenna Direction Connecting Power to the NXR-ZGW and NXR-ZRP Connecting the NXR-ZGW to a LANConnecting the Optional Accessory Antennas Determining the Power SourceUsing the PSN NetLinx connector for power Table top installation of the NXR-ZGW and NXR-ZRPRack mounting the NXR-ZGW and NXR-ZRP NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP Summary of Gateway Settings NXR-ZGW Browser-based Configuration Manager PagesSummary Determining the PAN settings of the NXR-ZGW Determining the IP settings of the NXR-ZGWRebooting the Configuration Manager Checking the firmware versionNetwork IP Settings ConfigurationSetting the IP Address IP AddressUser Settings Setting the DNS AddressSetting a new username and password User SettingsConnecting an NXR-ZRP to the network for the first time Enabling and disabling the wireless networkPersonal Area Network PAN NetworkConnecting a Repeater to the Gateway Setting the PAN channelFinding a device’s EUI address ConnectionsFinding the device’s description Determining the device typeChecking the device link status Determining the device link qualityPAN Device Details PAN Device DetailsRemoving a device from the Access List Putting a device on the Access ListLocating the device Changing a Connected Device descriptionChanging a device’s ZigBee networking information Allowing firmware updates to all devices on a network Allowing firmware updates to individual devicesUtilities Device FirmwareDetermining the connection status of a device Connection LogFinding the device’s Icsp number Connection LogTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Before beginning the Upgrade process Device ConfigurationSending Firmware to The NXR-ZGW Upgrading The NXR-ZGW via An IP AddressVerifying and Upgrading the device firmware via an IP Assigning Communication Settings and TCP/IP SettingsSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control