AMX NXR-ZGW/-ZRP manual NXA-WAP 2403A 3 dBI Antenna FG2255-20

Page 8

Overview

NXR-ZGW (FG5791-01) Specifications (Cont.)

Rear Components:
Power connector	Two power options are available:
	• 2-pin 3.5mm Phoenix connector
	• Power Over Ethernet (PoE) - powers the device through the CAT5 cable.
	Both Power and Data can be transmitted simultaneous through the CAT5
	cable when using the appropriate equipment.

Ethernet port	10BaseT modular (RJ-45) connector - used to connect the NXR-ZGW to
	your LAN and/or to connect your third party device to the LAN when the NXR-
	ZGW is used as a gateway.

Certifications:	• FCC ID: CWU-ZGW
	• IC ID: 5078A-ZGW
	• CE
	• IEC-60950
	• TELEC

Operating/Storage	• Operating Temperature: -30°C (-22°F) to 70°C (158°F)
Environments:	• Relative Humidity: 5% to 85% non-condensing; intended for indoor use only


Included Accessories:	• 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA)
	• Rubber feet
	• Velcro mounting strip
	• Power Supply (24-5791-SA)

Other AMX Products:	• Mio Modero R-3 Remote (FG148-03)
	• Mio Modero R-4 Remote (FG148-04)
	• NXR-ZRP NetLinx ZigBee Repeater (FG5791-02)
	• NXA-WAP 2403A 3 dBI Antenna (FG2255-20)
	• NXA-WAP 2405A 5.5 dBI Antenna (FG2255-21)
	• NXA-WAP 2413A Mounting Bracket (FG2255-24)

Connection LEDs

				ID Button
		PWR/STATUS
		LAN
		RF
		ANT	ID
		(Front)		Antenna Mount
	10BaseT Modular	ETHERNET
	(RJ-45) connector	ETHERNET	12VDC	2-pin 3.5mm Phoenix
	(RJ-45) connector		12VDC	2-pin 3.5mm Phoenix
				power connector

PoEPWR

(Rear)

FIG. 1 Front and Rear Components of the NXR-ZGW

2	NXR-ZGW/-ZRP

Image 8

Contents NXR-ZGW/-ZRP AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Device Configuration Overview NXR-ZGW SpecificationsNXR-ZGW FG5791-01 Specifications NXA-WAP 2403A 3 dBI Antenna FG2255-20 NXR-ZRP Specifications NXR-ZRP FG5791-02 SpecificationsFront and Rear Components of the NXR-ZRP How ZigBee works Network structureMesh Network Arrangements Single PAN ID installationsMultiple PAN ID installations FCC Compliance Multiple PAN ID NetworkNXR-ZGW/-ZRP Location and Antenna Direction InstallationThings to Consider Before Starting Connecting the NXR-ZGW to a LAN Connecting Power to the NXR-ZGW and NXR-ZRPConnecting the Optional Accessory Antennas Determining the Power SourceRack mounting the NXR-ZGW and NXR-ZRP Table top installation of the NXR-ZGW and NXR-ZRPUsing the PSN NetLinx connector for power NXR-ZGW/-ZRP Setting up a Network NXR-ZGW/-ZRP Summary NXR-ZGW Browser-based Configuration Manager PagesSummary of Gateway Settings Determining the IP settings of the NXR-ZGW Determining the PAN settings of the NXR-ZGWRebooting the Configuration Manager Checking the firmware versionConfiguration Network IP SettingsSetting the IP Address IP AddressSetting the DNS Address User SettingsSetting a new username and password User SettingsEnabling and disabling the wireless network Connecting an NXR-ZRP to the network for the first timePersonal Area Network PAN NetworkSetting the PAN channel Connecting a Repeater to the GatewayConnections Finding a device’s EUI addressFinding the device’s description Determining the device typeDetermining the device link quality Checking the device link statusPAN Device Details PAN Device DetailsPutting a device on the Access List Removing a device from the Access ListLocating the device Changing a Connected Device descriptionChanging a device’s ZigBee networking information Allowing firmware updates to individual devices Allowing firmware updates to all devices on a networkUtilities Device FirmwareConnection Log Determining the connection status of a deviceFinding the device’s Icsp number Connection LogTraffic Log Traffic LogFinding the device traffic NXR-ZGW/-ZRP Device Configuration Before beginning the Upgrade processSending Firmware to The NXR-ZGW Upgrading The NXR-ZGW via An IP AddressAssigning Communication Settings and TCP/IP Settings Verifying and Upgrading the device firmware via an IPSelect the device’s firmware file from the Files section FIG Using the ID Button to Change the NXR-ZGW’s Device Number NXR-ZGW/-ZRP It’s Your World Take Control