AMX NXB-KNX manual Admin Menu, Accessing the WebConsole

Page 10

Configuration

FIG. 2 Bonjour for Windows - example screen

As shown in FIG. 2, Bonjour for Windows operates as a plug-in to Internet Explorer (version 7 shown), and is displayed in the IE Explorer Bar. If you have installed Bonjour for Windows, but don’t see the Bonjour toolbar icon, you may need to "unlock" and expand the toolbars to see it.

Accessing the WebConsole

From any PC that has access to the LAN that the NXB-KNX resides on:

1.Open a web browser and type the IP Address of the target NXB-KNX unit in the Address Bar.

2.Press Enter to access the WebConsole for the specified NXB-KNX unit. The initial view is the IP Settings page (FIG. 1).

Note that this view is display-only, because you have not yet logged in. You must log in before making changes to the IP Settings page, and to access the other pages described in this section.

Admin Menu

There are several configuration pages included in the Configuration Manager, all of which are accessed via the Admin drop-down menu (FIG. 3):

FIG. 3 NXB-KNX Configuration Manager -Admin menu

Click on an option in this menu to access each of the configuration pages, as described in the following sub- sections:

6

NXB-KNX NetLinx KNX Interface

Page 9 Page 11
Image 10
Page 9 Page 11
Contents NXB-KNX AMX Limited Warranty and Disclaimer Table of Contents Table of Contents NXB-KNX NetLinx KNX Interface Product Specifications OverviewIntended for indoor use only Wiring and Connections InstallationEthernet 10/100 Base-T RJ-45 Wiring Configuration KNX Connector PoE Power Over EthernetOverview ConfigurationBonjour Zero-Configuration Client Determining the IP Address of the NXB-KNXAdmin Menu Accessing the WebConsoleEnable / Disable Security Settings Security SettingsLogin Information IP Settings Logging Into the Configuration Manager With Security EnabledPort Settings Port SettingsClock Manager Mode Manager Clock ManagerClock Manager Daylight Savings Clock Manager Daylight Savings ManagerClock Manager Nist Servers Only one Nist server is selectable at any given timeCurrent Application Information Application UpgradeBrowse for new Application Upload File Current Firmware Information Firmware UpgradeBrowse for new Firmware Upload File Programming Telnet Commands Establishing a Terminal Connection Via TelnetTerminal Commands MEM RebootSecurity Setup MSG OnoffSET Java Heap SET Ethernet Mode CMDSET DNS SET FTP PortSET LOG Count SET Https PortSET IP SET SSH PortShow LOG SET Telnet PortSET Time Show LOG ALLShow MEM Show HeapTime Programming Telnet Commands NXB-KNX NetLinx KNX Interface Programming Telnet Commands NXB-KNX NetLinx KNX Interface It’s Your World Take Control
Top Page Image Contents