AMX NXB-KNX manual Enable / Disable Security Settings, Login Information

Page 11

Configuration

Security Settings

Select Security Settings from the Admin drop-down menu to open the Security Settings page (FIG. 4). Use the options on the page to specify security options and login information for this NXB-KNX unit.

FIG. 4 Security Settings page

Enable / Disable Security Settings

Web Security:Click this checkbox to enable Web Security.

When Web security is enabled, a username and password are required to access any system Web pages (default = disabled).

Telnet Security: Click this checkbox to enable Telnet Security.

With Telnet Security enabled, a username and password are required to establish a Telnet or SSH connection (default = disabled).

Admin Security: Click this checkbox to enable Admin Security.

With Admin Security enabled, a username and password are required to modify any system configuration item (default = disabled).

Restore Factory Defaults: Click to restore all security settings to their factory default (all disabled).

Login Information

Use this set of options to specify a Username and Password. These will be required only if one or more of the Security Settings are enabled.

Username:

Enter the Username that will be required to login to this unit if

 

security is enabled. The default Username is "administrator".

New Password:

Enter a new password that will be required to login to this unit if

 

security is enabled. The default Password is "password".

Confirm Password:

Re-enter the new password in this field.

Restore Factory Defaults:

Click to restore the login information to the factory defaults:

 

• Default Username = administrator

 

• Default Password = password

NXB-KNX NetLinx KNX Interface

7

 

 

Image 11
Contents NXB-KNX AMX Limited Warranty and Disclaimer Table of Contents Table of Contents NXB-KNX NetLinx KNX Interface Overview Product SpecificationsIntended for indoor use only Ethernet 10/100 Base-T RJ-45 Wiring Configuration InstallationWiring and Connections PoE Power Over Ethernet KNX ConnectorDetermining the IP Address of the NXB-KNX ConfigurationBonjour Zero-Configuration Client OverviewAccessing the WebConsole Admin MenuLogin Information Security SettingsEnable / Disable Security Settings Logging Into the Configuration Manager With Security Enabled IP SettingsPort Settings Port SettingsClock Manager Clock Manager Mode ManagerClock Manager Daylight Savings Manager Clock Manager Daylight SavingsOnly one Nist server is selectable at any given time Clock Manager Nist ServersBrowse for new Application Upload File Application UpgradeCurrent Application Information Browse for new Firmware Upload File Firmware UpgradeCurrent Firmware Information Establishing a Terminal Connection Via Telnet Programming Telnet CommandsTerminal Commands MSG Onoff RebootSecurity Setup MEMSET FTP Port SET Ethernet Mode CMDSET DNS SET Java HeapSET SSH Port SET Https PortSET IP SET LOG CountShow LOG ALL SET Telnet PortSET Time Show LOGTime Show HeapShow MEM Programming Telnet Commands NXB-KNX NetLinx KNX Interface Programming Telnet Commands NXB-KNX NetLinx KNX Interface It’s Your World Take Control