AMX NXB-KNX manual Intended for indoor use only

Page 6

Overview

NXB-KNX Specifications (Cont.)

Operating	• Operating Temperature: 32°F - 104°F (0°C - 40°C)
Environment:	• Relative Humidity: 5% to 85% non-condensing
	• Relative Humidity: 5% to 85% non-condensing
	• Intended for indoor use only

Included Accessories:	• Rubber feet
	• Green 2-Pin 5mm Phoenix connector with captive screws

Other AMX	• AC-DIN-CS3 DIN Rail Mounting Bracket (FG532-01)
Equipment:	• PS-POE-AF PoE Injector (FG423-80)
	• PS-POE-AF PoE Injector (FG423-80)

Certifications:	• FCC Class B
	• CE
	• IEC60950
	• RoHS

2	NXB-KNX NetLinx KNX Interface

Image 6

Contents NXB-KNX AMX Limited Warranty and Disclaimer Table of Contents Table of Contents NXB-KNX NetLinx KNX Interface Product Specifications OverviewIntended for indoor use only Installation Wiring and ConnectionsEthernet 10/100 Base-T RJ-45 Wiring Configuration KNX Connector PoE Power Over EthernetOverview ConfigurationBonjour Zero-Configuration Client Determining the IP Address of the NXB-KNXAdmin Menu Accessing the WebConsoleSecurity Settings Enable / Disable Security SettingsLogin Information IP Settings Logging Into the Configuration Manager With Security EnabledPort Settings Port SettingsClock Manager Mode Manager Clock ManagerClock Manager Daylight Savings Clock Manager Daylight Savings ManagerClock Manager Nist Servers Only one Nist server is selectable at any given timeApplication Upgrade Current Application InformationBrowse for new Application Upload File Firmware Upgrade Current Firmware InformationBrowse for new Firmware Upload File Programming Telnet Commands Establishing a Terminal Connection Via TelnetTerminal Commands MEM RebootSecurity Setup MSG OnoffSET Java Heap SET Ethernet Mode CMDSET DNS SET FTP PortSET LOG Count SET Https PortSET IP SET SSH PortShow LOG SET Telnet PortSET Time Show LOG ALLShow Heap Show MEMTime Programming Telnet Commands NXB-KNX NetLinx KNX Interface Programming Telnet Commands NXB-KNX NetLinx KNX Interface It’s Your World Take Control