D-Link DSL-G604T manual Snmp User Table, Group Name, Snmp V3 Encryption, Auth-Protocol

DGS-3024 Gigabit Ethernet Switch Manual

Using SNMPv3 individual users or groups of SNMP managers can be allowed to perform or be restricted from performing specific SNMP management functions. The functions allowed or restricted are defined using the Object Identifier (OID) associated with a specific MIB. An additional layer of security is available for SNMPv3 in that SNMP messages may be encrypted. To read more about how to configure SNMPv3 settings for the Switch read the next section.

SNMP User Table

Use the SNMP User Table window to create a new SNMP user and add the user to an existing SNMP group or to a newly created group.

Figure 9- 4. SNMP User Table window

To delete an existing entry, click the Delete icon in the right-hand column that corresponds to the port you want to remove. To create a new entry, click the Add button, a separate window will appear.

Figure 9- 5. SNMP User Table Configuration window

The following parameters can be set:

Parameter Description

User Name	Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP
	user.
Group Name	This name is used to specify the SNMP group created can request SNMP messages.
SNMP V3 Encryption	Check to use encryption.
Auth-Protocol	MD5 - Specifies that the HMAC-MD5-96 authentication level will be used. This field is
	only operable when the Encryption field has been checked. This field will require the
	user to enter a password.

108