DGS-3024 Gigabit Ethernet Switch Manual
Figure 10- 13. Packet Size Analysis window (table)
The following fields can be set or viewed:
Parameter | Description | ||
|
|
|
|
Time Interval |
| Select the desired setting between 1s and 60s, where "s" stands for seconds. The |
|
|
| default value is one second. |
|
|
|
|
|
Record Number |
| Select the number of times the Switch will be polled between 20 and 200. The |
|
|
| default value is 20. |
|
|
|
|
|
64 |
| The total number of packets (including bad packets) received that were 64 octets in |
|
|
| length (excluding framing bits but including FCS octets). |
|
|
|
|
|
|
| The total number of packets (including bad packets) received that were between 65 |
|
|
| and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
|
|
|
|
|
|
| The total number of packets (including bad packets) received that were between |
|
|
| 128 and 255 octets in length inclusive (excluding framing bits but including FCS |
|
|
| octets). |
|
|
|
|
|
|
| The total number of packets (including bad packets) received that were between |
|
|
| 256 and 511 octets in length inclusive (excluding framing bits but including FCS |
|
|
| octets). |
|
|
|
|
|
|
| The total number of packets (including bad packets) received that were between |
|
|
| 512 and 1023 octets in length inclusive (excluding framing bits but including FCS |
|
|
| octets). |
|
|
|
|
|
|
| The total number of packets (including bad packets) received that were between |
|
|
| 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS |
|
|
| octets). |
|
|
|
|
|
128