D-Link DSL-G604T System Log Server, Parameter Description Index, Server IP, Severity, Facility

DGS-3024 Gigabit Ethernet Switch Manual

System Log Server

The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the Configuration folder, click System Log Server, to view the window shown below.

Figure 7- 46. System Log Servers window

The parameters configured for adding and editing System Log Server settings are the same. To add a new Syslog Server, click the Add button. To modify a current entry, click the hyperlinked number of the server in the Index field. Both actions will result in the same window to configure. See the table below for a description of the parameters in the following window.

Figure 7- 47. System Log Server – Add window

The following parameters can be set:

Parameter	Description
Index	Syslog server settings index.
Server IP	The IP address of the Syslog server.
Severity	This drop-down menu allows you to select the level of messages that will be sent. The
	options are Warning, Informational, and ALL.
Facility	Some of the operating system daemons and processes have been assigned Facility
	values. Processes and daemons that have not been explicitly assigned a Facility may
	use any of the "local use" facilities or they may use the "user-level" Facility. Those
	Facilities that have been designated are shown in the following. Bold font denotes the
	facility values that the Switch currently implements.

72