|
|
| |
|
|
|
|
|
| True. | |
|
|
|
|
| State | This |
|
|
| ports. The default is Enabled. |
|
|
|
|
|
Click Apply to implement changes made.
Forwarding
Unicast Forwarding
Open the Forwarding folder in the Configuration menu and click on the Unicast Forwarding link. This will open the Setup Static Unicast Forwarding Table window, as shown below:
Figure 7- 26. Setup Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter | Description | ||
|
|
|
|
VID (VLAN ID) |
| The VLAN ID number of the VLAN on which the above Unicast MAC address |
|
|
| resides. |
|
|
|
|
|
MAC Address |
| The MAC address to which packets will be statically forwarded. This must be a |
|
|
| unicast MAC address. |
|
|
|
|
|
Allowed to go port |
| Allows the selection of the port number on which the MAC address entered above |
|
|
| resides. |
|
|
|
|
|
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding 
under the Delete heading.
Multicast Forwarding
The following window describes how to set up Multicast Forwarding on the Switch. Open the Forwarding folder and click on the Multicast Forwarding link to see the entry window below:
48