|
|
|
|
|
|
|
| without receiving a membership report. The default is 260. |
|
|
|
| Leave Timer | This specifies the maximum amount of time in seconds between the Switch receiving a |
|
| leave group message from a host, and the Switch issuing a group membership query. |
|
| If no response to the membership query is received before the Leave Timer expires, |
|
| the (multicast) forwarding entry for that host is deleted. The default is 2 |
|
|
|
| Querier State | Choose Enabled to enable transmitting IGMP Query packets or Disabled to disable. |
|
| The default is Disabled. |
|
|
|
| State | This field can be toggled between Enabled and Disabled and enables or disables |
|
| IGMP for the VLAN. The default is Disabled. |
|
|
|
Click Apply to implement the new settings. Click the Show All IGMP Group Entries link to return to the Current IGMP Snooping Group Entries window.
Static Router Ports Entry
Figure 7- 11. Current Static Router Ports Entries window
Select an entry and click Modify to access the following window:
Figure 7- 12. Static Router Ports Settings window
The following parameters can be viewed or set:
Parameter | Description | ||
|
|
|
|
VID (VLAN ID) |
| This is the VLAN ID that, along with the VLAN Name, identifies the VLAN where the |
|
|
| multicast router is attached. |
|
|
|
|
|
VLAN Name |
| This is the name of the VLAN where the multicast router is attached. |
|
|
|
|
|
Member Ports |
| These are the ports on the Switch that will have a multicast router attached to them. |
|
|
|
|
|
33