DGS-3024 Gigabit Ethernet Switch Manual
Ingress port – A port on a Switch where packets are flowing into the Switch and VLAN decisions must be made.
Egress port – A port on a Switch where packets are flowing out of the Switch, either to another Switch or to an end station, and tagging decisions must be made.
IEEE 802.1Q (tagged) VLANs are implemented on the Switch. 802.1Q VLANs require tagging, which enables them to span the entire network (assuming all Switches on the network are IEEE
VLANs allow a network to be segmented in order to reduce the size of broadcast domains. All packets entering a VLAN will only be forwarded to the stations (over IEEE 802.1Q enabled Switches) that are members of that VLAN, and this includes broadcast, multicast and unicast packets from unknown sources.
VLANs can also provide a level of security to your network. IEEE 802.1Q VLANs will only deliver packets between stations that are members of the VLAN.
Any port can be configured as either tagging or untagging. The untagging feature of IEEE 802.1Q VLANs allows VLANs to work with legacy Switches that don't recognize VLAN tags in packet headers. The tagging feature allows VLANs to span multiple
The IEEE 802.1Q standard restricts the forwarding of untagged packets to the VLAN the receiving port is a member of. The main characteristics of IEEE 802.1Q are as follows:
•Assigns packets to VLANs by filtering.
•Assumes the presence of a single global spanning tree.
•Uses an explicit tagging scheme with
•802.1Q VLAN Packet Forwarding
Packet forwarding decisions are made based upon the following three types of rules:
•Ingress rules - rules relevant to the classification of received frames belonging to a VLAN.
•Forwarding rules between ports - decides whether to filter or forward the packet.
•Egress rules - determines if the packet must be sent tagged or untagged.
51