DGS-3024 Gigabit Ethernet Switch Manual
The user may configure the following parameters to configure the CIST on the Switch.
Parameter | Description | |
|
|
|
MSTI ID | The MSTI ID of the CIST is 0 and cannot be altered. |
|
|
|
|
Type | This field allows the user to choose a desired method for altering the MSTI settings. |
|
| The user has two choices. |
|
| Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with |
|
| the VID List parameter. |
|
| Remove VID - Select this parameter to remove VIDs from the MSTI ID, in con- |
|
| junction with the VID List parameter. |
|
|
|
|
VID List | This field is used to specify the VID range from configured VLANs set on the Switch. |
|
| Supported VIDs on the Switch range from ID number 1 to 4094. |
|
|
|
|
Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the following window for configuration.
| Figure 7- 19. Instance ID Settings window - Modify | |
The user may configure the following parameters for a MSTI on the Switch. | ||
|
|
|
Parameter | Description | |
|
|
|
MSTI ID | Displays the MSTI ID previously set by the user. |
|
|
|
|
Type | This field allows the user to choose a desired method for altering the MSTI settings. |
|
| The user has two choices. |
|
| Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with |
|
| the VID List parameter. |
|
| Remove VID - Select this parameter to remove VIDs from the MSTI ID, in con- |
|
| junction with the VID List parameter. |
|
|
|
|
VID List | This field is used to specify the VID range from configured VLANs set on the Switch |
|
| that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from |
|
| ID number 1 to 4094. This parameter can only be utilized if the Type chosen is Add or |
|
| Remove. |
|
|
|
|
Click Apply to implement changes made.
40