American Power Conversion AP9615 manual Warranty Information

Page 19

Warranty Information

Limited

American Power Conversion (APC) warrants the 5 Port

warranty

10Base-T Hub to be free from defects in materials and work-

 

manship for a period of 2 years from the date of purchase. Its

 

obligation under this warranty is limited to repairing or

 

replacing, at its own sole option, any such defective prod-

 

ucts.This warranty does not apply to equipment which has

 

been damaged by accident, negligence, or misapplication or

 

has been altered or modified in any way. This warranty

 

applies only to the original purchaser.

 

 

Warranty

To register your product with APC, visit our Warranty Regis-

registration

tration Web page. (http://www.apcc.com/support/warranty)

 

 

Warranty

Except as provided herein, American Power Conversion

limitations

makes no warranties, express or implied, including warran-

 

ties of merchantability and fitness for a particular purpose.

 

Some jurisdictions do not permit limitation or exclusion of

 

implied warranties; therefore, the aforesaid limitation(s) or

 

exclusion(s) may not apply to the purchaser.

 

Except as provided above, in no event will APC be liable for

 

direct, indirect, special, incidental, or consequential damages

 

arising out of the use of this product, even if advised of the

 

possibility of such damage.

 

Specifically, APC is not liable for any costs, such as lost

 

profits or revenue, loss of equipment, loss of use of equip-

 

ment, loss of software, loss of data, costs of substitutes,

 

claims by third parties, or otherwise. This warranty gives

 

you specific legal rights and you may also have other rights

 

which vary from state to state.

 

 

15

Image 19
Contents Port 10Base-T Hub Thank You Contents Page That allows you to expand or create a local area network SmartSlot 5-Port 10Base-T Hub is an APC accessoryLAN by installing it in the SmartSlot of an APC UPS or IntroductionProduct Description Label Color Activity Description For a description of the conditions indicated by LEDsMunication cable for each device to be attached Ways, as shown in FigureInstalling the Hub If present, unplug the Triple Chassis’s power Shut down and power off the connectedTurn off the System Enable switch on Turn off the ON/OFF switch on the frontScrews for below. Save the SmartSlot cover Use a #2 Phillips head screwdriver to removeScrews fastening the SmartSlot cover plate to Back panel of the UPS or triple chassis. KeepPress and hold the Power On button until you Using straight-through UTP cables, connect the StaProcedure listed below Plug the UPS back into the AC power outletInstallation Procedure Use of a crossover cable to connect the Uplink ports As many as 32 stations, as shown below in . Note2 central hubs Removing the Hub Provides suggestions for troubleshooting your hub TroubleshootingAction Cause Solution Troubleshooting Suggestions Port 10Base-T Hub SpecificationsWarranty Information Authorization RMA number ProcedureBe prepared to provide a description of the problem Technician will help solve the problem overDeclared Application of CouncilDirectives Standards to Which Conformity isW. a p c c . c o m