American International Electric SEG-M Connectors, SEG-M LED Indicators, Pin Label Description

Page 13

3.9.2SEG-M Connectors

The chart below describes the connectors on the SEG-M.

Connector	Description		Pin Configuration

			Pin		Label	Description

			1		A	RS-485 Data A (+)

			2		B	RS-485 Data B (-)

J1	RS-485 Data Connector		3		GND	RS-485 Data GND

			4		A	RS-485 Data A (+)
			4		A	RS-485 Data A (+)

			5		B	RS-485 Data B (-)

			6		GND	RS-485 Data GND


S1	Power/RS-232 Data Connector		Power/RS-232 Connector (used to plug onto
S1	Power/RS-232 Data Connector		backplane)
			backplane)

			Pin		Label	Description

			1		V+	Power Supply Positive

			2		GND	Power Supply Negative/
			2		GND	Data Ground
						Data Ground
TS1	RS-232 Data, RS-485 Data and Power		3		EGND	Earth Ground
TS1	Terminal Strip		4		A1	RS-232 Receive Data
	Terminal Strip		4		A1	RS-232 Receive Data

			5		A0	RS-232 Transmit Data

			6		A	RS-485 Data A

			7		B	RS-485 Data B

3.9.3SEG-M LED Indicators

The chart below describes the LED indicators on the SEG-M.

LED Designator	Label	Description
LED1	Power	SEG-M Power

LED7	TX	RS-485 Transmit

LED5	RX	RS-485 Receive

LED6	TX	RS-232 Transmit

LED4	RX	RS-232 Receive

Document Number: 6066005, Rev 3.2

Page 13 of 34

Image 13

Contents Ordering Information Secure Ethernet Gateway SEG-1 and SEG-MTable of Contents LED Status Product SpecificationsSEG-1 Diagrams Hardware InstallationSEG-1 to HubMax/Hub MiniMax Connection Method Connection the SEG-1 to a HubMax or Hub MiniMax RS-232SEG-1 to HC500P Connection Method Connecting the SEG-1 to HC500P RS-232Connecting Multiple HubMax/Hub MiniMax Networks SEG-1 to prox.pad plus Connection Method Connecting the SEG-1 to a prox.pad plus RS-485Connecting Multiple prox.pad plus Networks Connecting the SEG-1 to a Max 3 System RS-485 Connecting the SEG-1 to a MiniMax 3 System RS-485 SEG-M Diagram SEG-M Installation Plug On ModuleSEG-M LED Indicators SEG-M ConnectorsConnector Description Pin Configuration Label Pin Label DescriptionConnecting the SEG-M to a Hub MiniMax System RS-232 Connecting the SEG-M to a HubMax System RS-232Connecting the SEG-M to a Max 3 System RS-485 Connecting the SEG-M to a MiniMax 3 System RS-485 MAC Address Description SEG ConfigurationNo SEG parameters defined Found SEGs are displayed in grid Generate Security Key Dynamic IP Address, non-expiring leaseStatic IP Address Document Number 6066005, Rev Document Number 6066005, Rev SEG Setup Menu Channel 1 Configuration Settings of the RS-232 Port Sever ConfigurationChannel 2 Configuration Settings of the RS-485 Port Security Factory DefaultsExit Without Save Save and ExitSEG Parameters Generate Default Security Key Defaulting the SEG SettingsReset the Security Key in the SEG to all 0s Generate Random Security KeyReset the Security Key in the PC to all 0s Trouble Shooting Document Number 6066005, Rev Document Number 6066005, Rev FCC Compliance Statement