American International Electric SEG-1, SEG-M installation manual SEG Setup Menu

Page 24

4.3.3SEG Setup Menu

1.To change the IP address you should select option 0 server Configuration. A 3 digit number will be displayed in brackets. This is the first 'octet' of the current IP address of this SEG device. You will either enter a new 3 digit number and then press enter to accept it, or you can accept this number by pressing enter. You will do this for all 4 octets.

2.You must now press <ENTER> for the rest of the options to accept the default settings.

3.There is no need to change any other settings within this setup menu.

4.From the main menu, select 9 save and exit.

5.When you receive the Parameters stored ... message you can exit this utility by selecting File > Exit. You will select Yes if you are asked if you want to disconnect.

NOTE: Default values in all other menu systems should. The default value is kept by pressing the <ENTER> key when that setting is displayed.

Page 24 of 34

Document Number: 6066005, Rev 3.2

Image 24

Contents Secure Ethernet Gateway SEG-1 and SEG-M Ordering InformationTable of Contents Product Specifications LED StatusHardware Installation SEG-1 DiagramsConnection the SEG-1 to a HubMax or Hub MiniMax RS-232 SEG-1 to HubMax/Hub MiniMax Connection MethodConnecting the SEG-1 to HC500P RS-232 SEG-1 to HC500P Connection MethodConnecting Multiple HubMax/Hub MiniMax Networks Connecting the SEG-1 to a prox.pad plus RS-485 SEG-1 to prox.pad plus Connection MethodConnecting Multiple prox.pad plus Networks Connecting the SEG-1 to a Max 3 System RS-485 Connecting the SEG-1 to a MiniMax 3 System RS-485 SEG-M Installation Plug On Module SEG-M DiagramSEG-M Connectors SEG-M LED IndicatorsConnector Description Pin Configuration Label Pin Label DescriptionConnecting the SEG-M to a HubMax System RS-232 Connecting the SEG-M to a Hub MiniMax System RS-232Connecting the SEG-M to a Max 3 System RS-485 Connecting the SEG-M to a MiniMax 3 System RS-485 SEG Configuration MAC Address DescriptionNo SEG parameters defined Found SEGs are displayed in grid Dynamic IP Address, non-expiring lease Generate Security KeyStatic IP Address Document Number 6066005, Rev Document Number 6066005, Rev SEG Setup Menu Sever Configuration Channel 1 Configuration Settings of the RS-232 PortChannel 2 Configuration Settings of the RS-485 Port Factory Defaults SecurityExit Without Save Save and ExitSEG Parameters Defaulting the SEG Settings Generate Default Security KeyReset the Security Key in the SEG to all 0s Generate Random Security KeyReset the Security Key in the PC to all 0s Trouble Shooting Document Number 6066005, Rev Document Number 6066005, Rev FCC Compliance Statement