American International Electric SEG-M Connecting the SEG-1 to a prox.pad plus RS-485

Page 8

3.5Connecting the SEG-1 to a prox.pad plus (RS-485)

Two different methods can be used to connect P5 Connector of the prox.pad plus to the SEG-1:

1.Connect to the RS485 modular jack (front of SEG-1)

2.Connect to the RS485 terminals (rear of SEG-1)

NOTE: If connection to SEG-1 is NOT located at the prox.pad plus then the connection must be made via stranded/shielded cable.

3.5.1SEG-1 to prox.pad plus Connection Method 1

The diagram below illustrates the method to connect the prox.pad plus to the RS485 port of the SEG-1 via its RS485 modular jack on the front of the unit.

3.5.2SEG-1 to prox.pad plus Connection Method 2

The diagram below illustrates the method to connect the prox.pad plus to the RS485 port of the SEG-1 via the TS1 terminal block at the rear of the unit.

NOTE: The use of stranded/shielded cable in the diagram shows the connection to the SEG-1 across a distance.

Page 8 of 34

Document Number: 6066005, Rev 3.2

Image 8

Contents Secure Ethernet Gateway SEG-1 and SEG-M Ordering InformationTable of Contents Product Specifications LED StatusHardware Installation SEG-1 DiagramsConnection the SEG-1 to a HubMax or Hub MiniMax RS-232 SEG-1 to HubMax/Hub MiniMax Connection MethodConnecting the SEG-1 to HC500P RS-232 SEG-1 to HC500P Connection MethodConnecting Multiple HubMax/Hub MiniMax Networks Connecting the SEG-1 to a prox.pad plus RS-485 SEG-1 to prox.pad plus Connection MethodConnecting Multiple prox.pad plus Networks Connecting the SEG-1 to a Max 3 System RS-485 Connecting the SEG-1 to a MiniMax 3 System RS-485 SEG-M Installation Plug On Module SEG-M DiagramSEG-M Connectors SEG-M LED IndicatorsConnector Description Pin Configuration Label Pin Label DescriptionConnecting the SEG-M to a HubMax System RS-232 Connecting the SEG-M to a Hub MiniMax System RS-232Connecting the SEG-M to a Max 3 System RS-485 Connecting the SEG-M to a MiniMax 3 System RS-485 SEG Configuration MAC Address DescriptionNo SEG parameters defined Found SEGs are displayed in grid Dynamic IP Address, non-expiring lease Generate Security KeyStatic IP Address Document Number 6066005, Rev Document Number 6066005, Rev SEG Setup Menu Channel 2 Configuration Settings of the RS-485 Port Sever ConfigurationChannel 1 Configuration Settings of the RS-232 Port Factory Defaults SecurityExit Without Save Save and ExitSEG Parameters Defaulting the SEG Settings Generate Default Security KeyReset the Security Key in the SEG to all 0s Generate Random Security KeyReset the Security Key in the PC to all 0s Trouble Shooting Document Number 6066005, Rev Document Number 6066005, Rev FCC Compliance Statement