American International Electric SEG-M installation manual Connecting the SEG-1 to HC500P RS-232

Page 6

3.3Connecting the SEG-1 to HC500P (RS-232)

Two different methods to can be used to connect Port A of the HC500P to the SEG-1

1.Connect to the RS232 modular jack (front of SEG-1)

2.Connect to the RS232 terminals (rear of SEG-1)

NOTE: If connection to SEG-1 is NOT located at the HC500P then the connection must be made via stranded/shielded cable.

3.3.1SEG-1 to HC500P Connection Method 1

The diagram below illustrates the method to connect the HC500P to the RS232 port of the SEG-1 via its RS232 modular jack on the front of the unit.

3.3.2SEG-1 to HC500P Connection Method 2

The diagram below illustrates the connections between the HC500P and the RS232 port of the SEG-1 via the terminal block at the rear of the SEG-1.

NOTE: The use of stranded shielded cable used in this diagram below is necessary when connecting the SEG-1 at a distance from the controller.

Page 6 of 34

Document Number: 6066005, Rev 3.2

Image 6

Contents Secure Ethernet Gateway SEG-1 and SEG-M Ordering InformationTable of Contents Product Specifications LED StatusHardware Installation SEG-1 DiagramsConnection the SEG-1 to a HubMax or Hub MiniMax RS-232 SEG-1 to HubMax/Hub MiniMax Connection MethodConnecting the SEG-1 to HC500P RS-232 SEG-1 to HC500P Connection MethodConnecting Multiple HubMax/Hub MiniMax Networks Connecting the SEG-1 to a prox.pad plus RS-485 SEG-1 to prox.pad plus Connection MethodConnecting Multiple prox.pad plus Networks Connecting the SEG-1 to a Max 3 System RS-485 Connecting the SEG-1 to a MiniMax 3 System RS-485 SEG-M Installation Plug On Module SEG-M DiagramConnector Description Pin Configuration Label SEG-M ConnectorsSEG-M LED Indicators Pin Label DescriptionConnecting the SEG-M to a HubMax System RS-232 Connecting the SEG-M to a Hub MiniMax System RS-232Connecting the SEG-M to a Max 3 System RS-485 Connecting the SEG-M to a MiniMax 3 System RS-485 SEG Configuration MAC Address DescriptionNo SEG parameters defined Found SEGs are displayed in grid Dynamic IP Address, non-expiring lease Generate Security KeyStatic IP Address Document Number 6066005, Rev Document Number 6066005, Rev SEG Setup Menu Sever Configuration Channel 1 Configuration Settings of the RS-232 PortChannel 2 Configuration Settings of the RS-485 Port Exit Without Save Factory DefaultsSecurity Save and ExitSEG Parameters Reset the Security Key in the SEG to all 0s Defaulting the SEG SettingsGenerate Default Security Key Generate Random Security KeyReset the Security Key in the PC to all 0s Trouble Shooting Document Number 6066005, Rev Document Number 6066005, Rev FCC Compliance Statement