American International Electric SEG-1 Connecting the SEG-M to a HubMax System RS-232

Page 14

3.9.4Connecting the SEG-M to a HubMax System (RS-232)

Connect the SEG-M to the eight-position pin rail S1 above the first module on the backplane. Make sure the components on the SEG- M are facing away from the module. Use the two card guides to secure the SEG-M in place by snapping them into the holes on either side and sliding the SEG-M into them.

Note: No additional connections are required between the HubMax and the SEG-M.

3.9.5Connecting the SEG-M to a Hub MiniMax System (RS-232)

Connect the SEG-M to the eight-position pin rail S1 on the left hand side of on the backplane. Make sure the components on the SEG- M are facing away from the module. Use the two card guides to secure the SEG-M in place by snapping them into the holes on either side and sliding the SEG-M into them.

Note: No additional connections are required between the Hub MiniMax and the SEG-M.

Page 14 of 34

Document Number: 6066005, Rev 3.2

Image 14

Contents Secure Ethernet Gateway SEG-1 and SEG-M Ordering InformationTable of Contents Product Specifications LED StatusHardware Installation SEG-1 DiagramsConnection the SEG-1 to a HubMax or Hub MiniMax RS-232 SEG-1 to HubMax/Hub MiniMax Connection MethodConnecting the SEG-1 to HC500P RS-232 SEG-1 to HC500P Connection MethodConnecting Multiple HubMax/Hub MiniMax Networks Connecting the SEG-1 to a prox.pad plus RS-485 SEG-1 to prox.pad plus Connection MethodConnecting Multiple prox.pad plus Networks Connecting the SEG-1 to a Max 3 System RS-485 Connecting the SEG-1 to a MiniMax 3 System RS-485 SEG-M Installation Plug On Module SEG-M DiagramConnector Description Pin Configuration Label SEG-M ConnectorsSEG-M LED Indicators Pin Label DescriptionConnecting the SEG-M to a HubMax System RS-232 Connecting the SEG-M to a Hub MiniMax System RS-232Connecting the SEG-M to a Max 3 System RS-485 Connecting the SEG-M to a MiniMax 3 System RS-485 SEG Configuration MAC Address DescriptionNo SEG parameters defined Found SEGs are displayed in grid Dynamic IP Address, non-expiring lease Generate Security KeyStatic IP Address Document Number 6066005, Rev Document Number 6066005, Rev SEG Setup Menu Channel 2 Configuration Settings of the RS-485 Port Sever ConfigurationChannel 1 Configuration Settings of the RS-232 Port Exit Without Save Factory DefaultsSecurity Save and ExitSEG Parameters Reset the Security Key in the SEG to all 0s Defaulting the SEG SettingsGenerate Default Security Key Generate Random Security KeyReset the Security Key in the PC to all 0s Trouble Shooting Document Number 6066005, Rev Document Number 6066005, Rev FCC Compliance Statement