APC AP9254 manual Changing the Size, Colour and Position of the ID Window, Operation Procedure

Page 21

4.5 The ID Window

The ID Window appears when you change channels and displays the name of the selected channel. This window can be individually configured for each channel in your system. The characteristics of the ID Window can be changed from the Channel Maintenance Menu. This option is only available if you are operating in non-secure mode or if you are the system administrator.

Changing the Size, Colour and Position of the ID Window

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command Menu.

2.Select ÔÔChannel maintenanceÕÕ from the Command Menu.

3.Choose the option ÔÔOptions for ID windowÕÕ.

Follow the procedures outlined in the table below to change the size, color or position of your ID Window.

Operation	Procedure

Move the ID Window	Use the arrow keys or mouse to move the ID
	Window's position on the monitor. If the
	window flickers but does not move, continue
	tapping the arrow keys until it moves back
	into range.
Change window background color	Press the <PAGE UP> key to cycle through
	the available window background colours.
Change text color	Press the <PAGE DOWN> key to cycle
	through the available text colours.
Change window size	Use the (+) and (-) keys to change the length
	of the ID Window.

4.Press Enter to accept the changes or press Esc to exit the menu without saving the changes.

17

Image 21

Contents KVM Switch Canadian Department of Communications Statement FCC StatementTable of Contents Page Expansion for up to 64 computers Product Overview Feature OverviewPush-button and keyboard switching Compatibility Connecting your Peripherals Installation Basic InstallationConnecting Computers to the APC KVM Switch Rack Mount Installation Attaching Multiple APC KVM Switch Units Advanced InstallationBasic Operations Overview ESC Keyboard ControlKey Sequence Action Keyboard SwitchingAction System Control and MaintenanceOSD Operations Activating OSD OSD Window APC KVM SwitchCommand Menu Basic Channel Maintenance Adding New Channels base unit onlyAdding New Channels with a cascaded unit Changing Channel Names and Addresses Deleting an Existing ChannelOperation Procedure ID WindowChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Administrator Password Administrator FunctionsMultiple User Logins Differences between Secure and Non-secure Operating ModesCreating the Administrator Password Setting the Administrator Logout TimePush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method With the Scan Button non-secure mode only Setting the Scanning OrderTurning Scanning On and Off From the OSD menuSetting the Scanning Dwell Time For Sequential ScanningFor Alphanumeric Scanning Scanning and Security Specifications Initial Configurations PairingSelect Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Symptom Action TroubleshootingSymptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m