APC AP9258, AP9254 manual User

Page 34

Connecting Computers to the APC KVM Switch

1.Power down the servers that will be part of your APC KVM Switch system. Make sure that both of your switch units are turned off.

2.Locate your first input cable. It will have a 25-pin ÒDÓ connector at one end. Plug this cable into any numbered channel port on the rear of the switch. The other end of the input cable will have three con- nectors: a 15-pin ÒHDDÓ connector for your video, a PS/2 keyboard connection, and a PS/2 mouse connection. The PS/2 connectors are designated by a mouse or keyboard icon on the connector. Plug these connectors into the matching ports on your computer.

MOUSE PORT

KEYBOARD

VIDEO

100-
240V~,.1a,		50/80Hz

T 2A,	250 VAC

USER

H

G

F

E

D

C

B

A

3.Locate your next input cable. Repeat step 2 with all the computers that will be attached to your master switch. Next, attach the remain- ing computers to the slave switch.

30

Image 34

Contents KVM Switch FCC Statement Canadian Department of Communications StatementTable of Contents Page Product Overview Feature Overview Expansion for up to 64 computersPush-button and keyboard switching Compatibility Installation Basic Installation Connecting your PeripheralsConnecting Computers to the APC KVM Switch Rack Mount Installation Advanced Installation Attaching Multiple APC KVM Switch UnitsBasic Operations Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance ActionOSD Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Adding New Channels base unit only Basic Channel MaintenanceAdding New Channels with a cascaded unit Deleting an Existing Channel Changing Channel Names and AddressesID Window Operation ProcedureChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Multiple User Logins Administrator FunctionsAdministrator Password Differences between Secure and Non-secure Operating ModesSetting the Administrator Logout Time Creating the Administrator PasswordPush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method Turning Scanning On and Off Setting the Scanning OrderWith the Scan Button non-secure mode only From the OSD menuFor Sequential Scanning Setting the Scanning Dwell TimeFor Alphanumeric Scanning Scanning and Security Specifications Pairing Initial ConfigurationsSelect Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Troubleshooting Symptom ActionSymptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m