APC AP9258, AP9254 manual Setting the ID Window Dwell Time

Page 22

Setting the ID Window Dwell Time

This menu selection lets you set the time that the ID Window remains on screen after a channel switch. Each channel can be configured independently. The default time is set for 5 seconds.

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command Menu.

2.Select ÔÔChannel maintenanceÕÕ from the Command Menu.

3.Choose the option ÔÔDwell time for ID windowÕÕ.

4.Enter a number between 0-255 seconds. Entering 0 disables the ID Window. Entering 255 allows the ID Window to stay on screen the entire time the channel is active.

18

Image 22

Contents KVM Switch FCC Statement Canadian Department of Communications StatementTable of Contents Page Product Overview Feature Overview Expansion for up to 64 computersPush-button and keyboard switching Compatibility Installation Basic Installation Connecting your PeripheralsConnecting Computers to the APC KVM Switch Rack Mount Installation Advanced Installation Attaching Multiple APC KVM Switch UnitsBasic Operations Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance ActionOSD Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Adding New Channels base unit only Basic Channel MaintenanceAdding New Channels with a cascaded unit Deleting an Existing Channel Changing Channel Names and AddressesID Window Operation ProcedureChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Multiple User Logins Administrator FunctionsAdministrator Password Differences between Secure and Non-secure Operating ModesSetting the Administrator Logout Time Creating the Administrator PasswordPush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method Turning Scanning On and Off Setting the Scanning OrderWith the Scan Button non-secure mode only From the OSD menuFor Sequential Scanning Setting the Scanning Dwell TimeFor Alphanumeric Scanning Scanning and Security Specifications Pairing Initial ConfigurationsSelect Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Troubleshooting Symptom ActionSymptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m