APC AP9258, AP9254 manual Rack Mount Installation

Page 10

1 !

0

Hz 50/60

,.1A,

-240V 100

7. Power-up your APC KVM Switch unit first, then all attached servers.

The APC KVM Switch and all attached servers should be powered-down before servicing the unit. Always disconnect the power cord from the electrical socket.

2.2Rack Mount Installation

1.Remove the side screws that secure the cover on your KVM Switch.

2.Line up the holes in the side brackets with the screw holes in the side of the KVM Switch unit.

3.Using the previously removed screws, thread one through each of the holes in the sides of the rack mount brackets and into the KVM Switch cover. Tighten them securely.

100-
240V~,.1a,			50/80Hz
			50/80Hz
T		VAC	POWER
2A,	250
				PAIRING

USER

8

7

6

5

4

3

MADE IN

USA

2

1

6

Image 10

Contents KVM Switch FCC Statement Canadian Department of Communications StatementTable of Contents Page Product Overview Feature Overview Expansion for up to 64 computersPush-button and keyboard switching Compatibility Installation Basic Installation Connecting your PeripheralsConnecting Computers to the APC KVM Switch Rack Mount Installation Advanced Installation Attaching Multiple APC KVM Switch UnitsBasic Operations Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance ActionOSD Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Adding New Channels base unit only Basic Channel MaintenanceAdding New Channels with a cascaded unit Deleting an Existing Channel Changing Channel Names and AddressesID Window Operation ProcedureChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Multiple User Logins Administrator FunctionsAdministrator Password Differences between Secure and Non-secure Operating ModesSetting the Administrator Logout Time Creating the Administrator PasswordPush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method Turning Scanning On and Off Setting the Scanning OrderWith the Scan Button non-secure mode only From the OSD menuFor Sequential Scanning Setting the Scanning Dwell TimeFor Alphanumeric Scanning Scanning and Security Specifications Pairing Initial ConfigurationsSelect Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Troubleshooting Symptom ActionSymptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m