APC AP9254, AP9258 Setting the Scanning Order, Turning Scanning On and Off, From the OSD menu

Page 27

5.2Setting the Scanning Order

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command Menu.

2.Choose ÔÔScanning orderÕÕ from the menu.

3.Select either ÔÔSequential orderÕÕ or ÔÔAlphanumeric orderÕÕ.

4.Press Enter.

5.3Turning Scanning On and Off

From the OSD menu.

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command Menu.

2.Select ÔÔTurn scanning ONÕÕ or ÔÔTurn scanning OFFÕÕ from the menu. This is a toggle option - only one scanning option will show on the menu at any one time.

3.Press Enter.

With the Scan Button (non-secure mode only)

1.You may initiate scanning by pressing and holding the Scan push- button until the SCAN LED lights up.

2.Scanning may be halted if a channel is selected or if the Scan push- button is pressed again.

23

Image 27

Contents KVM Switch Canadian Department of Communications Statement FCC StatementTable of Contents Page Expansion for up to 64 computers Product Overview Feature OverviewPush-button and keyboard switching Compatibility Connecting your Peripherals Installation Basic InstallationConnecting Computers to the APC KVM Switch Rack Mount Installation Attaching Multiple APC KVM Switch Units Advanced InstallationBasic Operations Overview ESC Keyboard ControlKey Sequence Action Keyboard SwitchingAction System Control and MaintenanceOSD Operations Activating OSD OSD Window APC KVM SwitchCommand Menu Basic Channel Maintenance Adding New Channels base unit onlyAdding New Channels with a cascaded unit Changing Channel Names and Addresses Deleting an Existing ChannelOperation Procedure ID WindowChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Differences between Secure and Non-secure Operating Modes Administrator FunctionsAdministrator Password Multiple User LoginsCreating the Administrator Password Setting the Administrator Logout TimePush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method From the OSD menu Setting the Scanning OrderWith the Scan Button non-secure mode only Turning Scanning On and OffSetting the Scanning Dwell Time For Sequential ScanningFor Alphanumeric Scanning Scanning and Security Specifications Initial Configurations PairingSelect Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Symptom Action TroubleshootingSymptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m