APC AP9258 Setting the Scanning Dwell Time, For Sequential Scanning, For Alphanumeric Scanning

Page 28

By keyboard hot-key sequence (System Administrator or non-secure mode only)

The following key sequences control scanning.

Key Sequence	Action

<CM>SG<Enter>	Enables the scan Go command.

<CM>SH<Enter>	Enables the scan Halt command.

5.4 Setting the Scanning Dwell Time

(System Administrators and non-secure mode users.)

For Sequential Scanning

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command menu.

2.Choose the option ÔÕSequential Scan Dwell TimeÕÕ.

3.Enter a number between 2-60 seconds. The value you enter will be the dwell time for each active channel in the system.

For Alphanumeric Scanning

1.Highlight the channel that you wish to configure in the main OSD Window.

2.Next, press the Control key twice or type Alt-Mto access the Com- mand Menu.

3.Select ÒChannel MaintenanceÓ from the Command Menu.

4.Choose the option ÔÔAlpha Scan Dwell TimeÕÕ.

5.Enter a number between 0-255 seconds. Enter 0 to skip a channel during scanning.

24

Image 28

Contents KVM Switch FCC Statement Canadian Department of Communications StatementTable of Contents Page Product Overview Feature Overview Expansion for up to 64 computersPush-button and keyboard switching Compatibility Installation Basic Installation Connecting your PeripheralsConnecting Computers to the APC KVM Switch Rack Mount Installation Advanced Installation Attaching Multiple APC KVM Switch UnitsBasic Operations Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance ActionOSD Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Adding New Channels base unit only Basic Channel MaintenanceAdding New Channels with a cascaded unit Deleting an Existing Channel Changing Channel Names and AddressesID Window Operation ProcedureChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Administrator Functions Administrator PasswordMultiple User Logins Differences between Secure and Non-secure Operating ModesSetting the Administrator Logout Time Creating the Administrator PasswordPush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method Setting the Scanning Order With the Scan Button non-secure mode onlyTurning Scanning On and Off From the OSD menuFor Sequential Scanning Setting the Scanning Dwell TimeFor Alphanumeric Scanning Scanning and Security Specifications Pairing Initial ConfigurationsSelect Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Troubleshooting Symptom ActionSymptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m