Chapter

10

Windows NT

The procedures in this chapter are valid for Windows NT version 3.x and 4.x. For information about driver installation for later versions of Windows NT, contact Tektronix technical support or visit the Tektronix web site:

www.tek.com/Color_Printers/support

Setting the printer’s IP address

There are three ways to set the printer’s IP address:

Use the printer’s front panel. For more information, see “General information on setting IP parameters (front panel)” on page 57.

Use DHCP. For more information, see “Setting IP parameters: DHCP” on page 66.

Download a PostScript utility file. For more information, see the README file on the printer’s CD-ROM. The README file is in the UTILS directory.

Adding the Windows NT 4.0 driver on a Windows NT 4.0 server or workstation

The Windows NT 4.0 PostScript driver is a PPD-based driver. Follow these instructions to add or update the Tektronix Phaser PPD for use with

Windows NT 4.0. Adding this support gives your printer access to Tektronix page sizes, tray selection, TekColor color corrections, and resident fonts.

This update procedure provides printer page-size information for Windows NT applications. These instructions assume a basic familiarity with Windows NT operation and terminology. For additional information about Windows NT, refer to your Microsoft Windows NT documentation.

N O T E

You may need the Windows NT 4.0 CD-ROM or your printer’s software CD-ROM to complete this procedure.

PhaserShare Networking Manual

99

Page 107
Image 107
Tektronix Phasershare Printer manual Windows NT, Setting the printer’s IP address