Tektronix Phasershare Printer manual PhaserShare Networking Manual

4 Novell NetWare Configuration

2.Access the menu of frame types:

a.Press the right arrow button until the front panel displays NetWare.

b.Press Menu; the front panel displays Interface.

c.Press the right arrow button until the front panel displays IPX Frame Type.

d.Press Menu; the front panel displays the first in a menu of frame types.

3.Enable or disable the frame type:

a.Press the right arrow button until the frame type you want is displayed.

b.Press Menu to display the current status of the frame type: On or Off.

c.Press the right arrow button until the frame type is either On or Off, as desired.

d.Press Select to enter your choice into the printer. The front panel briefly displays Selected, then returns to the display of the frame type name.

e.Press Exit (the far right button) to return to the menu of frame types.

4.You can set more than one frame type; to set other frame types, repeat Step 3.

5.Return the printer to normal operation:

a.Press Exit (the far right button) until Network Settings appears on the top line of the display.

b.Press Exit again.

■If you have changed any parameters that require a printer reset to take effect, you will be prompted to reset the printer. If you press Confirm, the printer resets. To return to normal operation without resetting the printer, press Exit (the far right button); Printer Menu appears on the top line of the display. Press Exit again; the printer returns to normal operation, but the changes you have made will not take effect until the next time the printer is reset.

■If you have not changed any parameters that require a printer reset, press Exit again; the front panel displays Ready.

42PhaserShare Networking Manual