Tektronix Phasershare Printer manual Installation methods, Installation procedure

PhaserShare Administrator Software for NetWare Networks 5

Installation methods

The installer supports the following installation methods:

■Standard install. This is the recommended installation method; it copies the necessary files to your workstation’s hard disk. All program features are installed automatically using standard settings.

■Network install. This method allows you to specify a drive and directory on a NetWare file server in which to place the files needed for the installation. You can then install the software from that directory to designated workstations using the standard install.

N O T E

The drive you specify should be a NetWare shared drive. You must have write access to the directory you specify.

Installation procedure

Installation for Phaser 840, 740, and 780 printers

1.Put the printer’s software CD-ROM into the CD-ROM drive.

■If the Windows autorun feature is enabled, the CD-ROM launches automatically.

■If the Windows autorun feature is disabled, double-click My Computer, then double click the CD icon to launch the CD-ROM.

2.View the brief introductory information, then click Install Drivers to launch the installer.

3.When you are prompted to select Easy Install or Custom Install, select Custom Install.

4.During custom installation, a dialog box is displayed enabling you to install the PhaserShare Administrator. Follow the on-screen prompts to complete the installation.

Installation for Phaser 360 printers

1.Locate and run the file SETUP.EXE on the printer’s CD-ROM or on printer software diskette 1.

2.When you are prompted to select Easy Install or Custom Install, select Custom Install.

3.During the custom installation, a dialog box is displayed enabling you to install the PhaserShare Administrator. Follow the on-screen prompts to complete the installation.

PhaserShare Networking Manual 45