Tektronix Phasershare Printer manual Ethernet connections and indicators

2 PhaserShare Series B Network Interfaces

Ethernet connections and indicators

The printer’s built-in Ethernet connector

The printer’s built-in Ethernet connector has the following connections and indicators:

1.LINK indicator (Phaser 360 only); on indicates a working connection to a hub, off indicates no connection to a hub.

2.RCV indicator (green); blinks while the network interface is receiving.

3.XMT indicator (yellow); blinks while the network interface is transmitting.

4.Twisted pair (10BaseT) connector.

2	3
RCV	XMT

1

4

LNK Ethernet

0180-01

PhaserShare Series B Ethernet card

The PhaserShare Series B Ethernet card has the following connections and indicators:

1.TX indicator (yellow); blinks while the network interface is transmitting.

2.RX Link indicator (green); blinks while the network interface is receiving.

3.Speed indicator (yellow); on indicates 100 Mbps, off indicates 10 Mbps.

4.Twisted pair connection indicator; on indicates a working connection to a hub, off indicates no connection to a hub. If the 10Base2 connector (6) is used, this indicator is off.

5.Twisted pair (10BaseT or 100BaseTx) connector.

6.Thin coax (10Base2) connector.

1 3 5 6

PhaserShareTM

Series B TX

Ethernet Card

RX

100 Mbs

TP

LINK

10/100Base-TX 10Base2

2 4 9789-05

12PhaserShare Networking Manual