Tektronix Phasershare Printer manual Install the driver, Name the printer and set up sharing

10 Windows NT

Install the driver

1.In the Add Printer Wizard dialog box, click Have Disk to add a new Tektronix driver.

2.Type the path name to the driver files. This can be A:\ if the files are on a diskette. If these files were downloaded from an on-line service, type the path name where they were saved. Click OK.

3.Select the printer model and click Next.

4.If prompted that a driver is already installed for this printer, select Replace existing driver. Click Next.

Name the printer and set up sharing

1.Type the printer's name; this can be any name you want. If the Windows-based applications are to use this printer as the default printer, click the appropriate box. Click Next.

102PhaserShare Networking Manual