Tektronix Phasershare Printer manual Press ---- the front panel displays EtherTalk

15 Disabling Protocols

5.Disabling EtherTalk: To return the printer to normal operation, go immediately to Step 8; to continue and disable the EtherTalk protocol, follow these steps:

a.Press ---->; the front panel displays EtherTalk.

b.Press Menu; the front panel displays the current status of the protocol:

EtherTalk:Enabled or EtherTalk:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

c.Press ---->until the front panel displays EtherTalk:Disabled.

d.Press OK to disable the protocol; the front panel briefly displays

Selected, then it displays EtherTalk.

6.Disabling NetWare: To return the printer to normal operation, go immediately to Step 8; to continue and disable the NetWare protocol, follow these steps:

a.Press ---->; the front panel displays NetWare.

b.Press Menu again; the front panel displays Interface.

c.Press Menu to display the current status of the protocol:

Interface:Enabled or Interface:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

d.Press ---->until the front panel displays Interface:Disabled.

e.Press OK to disable the protocol; the front panel briefly displays

Selected, then it displays Interface.

f.Press Exit (the far left button) to return to the NetWare display.

7.Disabling HTTP: To return the printer to normal operation, go immediately to Step 8; to continue and disable the HTTP protocol, follow these steps:

a.Press ---->; the front panel displays HTTP.

b.Press Menu; the front panel displays the current status of the protocol:

HTTP:Enabled or HTTP:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

c.Press ---->until the front panel displays HTTP:Disabled.

d.Press OK to disable the protocol; the front panel briefly displays Selected, then it displays HTTP.

160PhaserShare Networking Manual