Tektronix Phasershare Printer manual 135

Printer Management 13

Phaser 740 printer

1.Press Menu; the front panel displays Help Pages.

2.Press ---->or <----until the front panel displays Network Settings.

3.Enter the Network Settings menu by pressing Menu.

4.Press ---->until the front panel displays TCP/IP.

5.Press ---->or <----until the front panel displays Usage Profile.

6.Press Menu; the front panel displays the first of two Usage Profile choices.

■To email a full report, press ---->or <----until the front panel displays Email Report. Then press OK. The recipients of this report are specified in the PhaserLink email notification pages. A full report is sent to the users specified in the Regular Intervals field of the View and Configure Email Custom Settings page. A report is also sent to Tektronix if the Email to Tektronix field in the View and Configure Email Notification Settings page is set to On.

■To email a job report, press ---->or <----until the front panel displays Email Job Report. Then press OK. The recipients of this report are specified in the PhaserLink status notification (email notification) pages. A job report is sent to the users specified in the Each Job field of the View and Configure Email Custom Settings page.

7.To return the printer to normal operation, press Exit (the far left button) until the front panel displays Ready.

Phaser 780 printer

1.While Ready is displayed, press Select; the Printer menu is displayed:

Printer Menu
Help Pages	Menu

2.Press Menu; the Help Pages menu is displayed:

Help Pages
Configuration Page	Print

3.Press the left or right arrow buttons until the front panel displays Usage Profile:

Help Pages
Usage Profile	Menu

PhaserShare Networking Manual 135